Abstract:This paper presents an efficient 8-MS/s 16-bit successive approximation register (SAR) analog-to-digital converter (ADC) with the proposed symmetric complementary switching (SCS) and split passive reference segmentation (SPRS). Conventionally, improving the SAR ADC speed compromises the signal-to-noise-and-distortion ratio (SNDR) and energy efficiency due to the high precision requirement and the sequential bit-cycling. In this design, the proposed SCS scheme reduces the parasitic capacitance in the sampling path and the settling error of the capacitive digital-to-analog converter (CDAC) with low SNDR and hardware penalties. In addition, to reduce reference ripples, active reference buffers generally consume high power while the passive methods may degrade the SNDR or occupy large areas. To efficiently reduce reference settling errors, an area-efficient SPRS is developed, which suppresses the reference settling error through the split reference segmentation. The prototype chip is fabricated in a 180-nm CMOS process and occupies an area of 0.57 mm2. Measurements show the ADC achieves a peak SNDR of 89.2 dB at 8 MS/s with a 9.5-mW power consumption. The Schreier-figure-of-merit (FoM) is 175.4 dB.

An 8-Bit 166nw 11.25 Ks/s 0.18um Two-Step-sar ADC for RFID Applications Using Novel DAC Architecture

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

A 16-Channel 12-Bit Rail-to-rail Successive Approxmation Register ADC for AFEs

Design of an 8-Channel 12bits 1MSPS SAR ADC

A Subthreshold 8-Bit 78.4nw 17.8 Ks/s 0.18um SAR ADC for RFID Sensing Applications

78 Nw Ultra-Low-power 17 Ks/s Two-Step-successive Approximation Register Analogue-to-digital Converter for RFID and Sensing Applications

A 10 MS/s 10 bit SAR A/D Converter in RF System

A 10-Bit 16-Ms/s Ultra Low Power SAR ADC for IoT Applications

A Design of Low-Power 10-bit 1-MS/s Asynchronous SAR ADC for DSRC Application

A subthreshold ultra low power 22fJ/conversion flash ADC for RFID sensing applications

Design of an Ultra-Low Power SAR ADC for Biomedical Applications

An 8-MS/s 16-bit SAR ADC With Symmetric Complementary Switching and Split Passive Reference Segmentation in 180-nm Process

A 10-Bit 1ms/s Low Power SAR ADC for RSSI Application

A 0.024 Mm<sup>2</sup> 4.9 Fj 10-Bit 2 MS/s SAR ADC in 65 Nm CMOS

A 24-µW 11-bit 1-MS/s SAR ADC with a bidirectional single-side switching technique

An 11-bit 200MS/s SAR ADC IP for wireless comunacation SOC

A 0.9-V 12-Bit 100-Ms/s 14.6-Fj/conversion-step SAR ADC in 40-Nm CMOS

An 11 Bit 150 MS/s Sub-range SAR ADC IP for Wireless Transceiver

A 0.9V 12-Bit 200-Ks/s 1.07µw SAR ADC with Ladder-Based Reconfigurable Time-Domain Comparator

A Two-step SAR ADC with Synchronous DEM Calibration Achieving Up to 15% Power Reduction.

A 11-Bit 1.2V 40.3μw SAR ADC with Self-Dithering Technique