Abstract:This brief presents a sub-microwatt oversampling successive approximation register (SAR) analog-to-digital converter (ADC) dedicated to Internet of Things sensing applications. Several techniques are adopted in this design to enable ultra-low power consumption while achieving 15-bit accuracy. The ground sampling technique minimizes DAC switching energy without requiring a common mode voltage while a comparator with dynamic bit trial settings achieves low noise in a power efficient manner using a two-stage dynamic preamplifier. Two redundant bits perform error correction, and dynamic element matching techniques are employed to enhance linearity. Implemented in a 180-nm CMOS technology, the proposed SAR ADC occupies an area of 0.22 mm2. In the oversampling mode with 6.4-kHz sampling rate, it achieves a signal-to-noise-and-distortion ratio (SNDR) of 90 dB and a spurious-free dynamic range (SFDR) of 96 dB from dc to 200 Hz thanks to high-pass shaping of mismatch errors, and draws only 560 nA from a 1-V supply according to post-layout transient noise simulations, which is the first reported sub-microwatt ADC to exceed 90 dB of SNDR in the open literature. This translates to a Schreier figure-of-merit of 175.5 dB. In the low power Nyquist mode, it only consumes 41 nW at 400-Hz sampling rate and achieves an SNDR of 72 dB and an SFDR of 92 dB.

A Subthreshold 8-Bit 78.4nw 17.8 Ks/s 0.18um SAR ADC for RFID Sensing Applications

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

An 8-Bit 166nw 11.25 Ks/s 0.18um Two-Step-sar ADC for RFID Applications Using Novel DAC Architecture

78 Nw Ultra-Low-power 17 Ks/s Two-Step-successive Approximation Register Analogue-to-digital Converter for RFID and Sensing Applications

Design of an 8-Channel 12bits 1MSPS SAR ADC

A 16-Channel 12-Bit Rail-to-rail Successive Approxmation Register ADC for AFEs

A subthreshold ultra low power 22fJ/conversion flash ADC for RFID sensing applications

A 10 MS/s 10 bit SAR A/D Converter in RF System

Design of an Ultra-Low Power SAR ADC for Biomedical Applications

A 0.024 Mm<sup>2</sup> 4.9 Fj 10-Bit 2 MS/s SAR ADC in 65 Nm CMOS

A 10-Bit 16-Ms/s Ultra Low Power SAR ADC for IoT Applications

A 0.9V 12-Bit 200-Ks/s 1.07µw SAR ADC with Ladder-Based Reconfigurable Time-Domain Comparator

An 8-Bit 100ks/s Low Power Successive Approximation Register ADC for Biomedical Applications

A 24-µW 11-bit 1-MS/s SAR ADC with a bidirectional single-side switching technique

An 8-MS/s 16-bit SAR ADC With Symmetric Complementary Switching and Split Passive Reference Segmentation in 180-nm Process

A 10-Bit 1ms/s Low Power SAR ADC for RSSI Application

A 1-V 560-Nw SAR ADC with 90-Db SNDR for IoT Sensing Applications

A Design of Low-Power 10-bit 1-MS/s Asynchronous SAR ADC for DSRC Application

A Low Power 10-Bit 100-Ms/s SAR ADC in 65nm CMOS

A 5ks/s 112nw Sar Adc for Portable Bio-Potential Acquisition System