Abstract:As the residue on the CDAC of a noise-shaping (NS) SAR ADC mainly contains quantization error $(\mathrm{n}_{\mathrm{q}})$ and comparator noise ($\mathrm{n}_{\text{comp}}$), it is desirable to reduce them simultaneously to boost the SNR by NS. However, reducing n <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">comp</inf> by 2x would increase the comparator’s power consumption by $\sim 4\mathrm{x}$. Therefore, many NS SAR ADCs adopt $8\sim 10\mathrm{~b}$ CDAC and low-power comparators for comparable $\mathrm{nq}_{\mathrm{q}}$ and n <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">comp</inf> . Then, the residue can be shaped by $1^{\text{st}}$-order NS with high OSR (25) [1] or $4^{\text{th}}$-order NS [2–3] to boost the SNR to over $85\mathrm{~dB}$, at the price of limited input BW or increased circuit complexity. Although pipelined NS SAR or MASH suppress the last-stage n comp effectively, amplifying the preceding stage’s residue requires either power-hungry amplifier or dynamic amplifier with intense calibration [4]. Alternatively, LSB repeating can suppress $n_{\text{comp}}$ power-efficiently [5]. The 78.4dB-SNDR NS SAR with 9bit CDAC in [6] suppress n <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">comp</inf> with 4-times LSB repeating and use the results to switch the CDAC after tri-level voting. However, the suppression effect of n <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">comp</inf> would be much limited for a precision CDAC (10 12bit) with more times LSB repeating, as it only translate the results into 3 different levels.

An NS-SAR ADC with Full-bit High-order Mismatch Shaped CDAC

An 18-Bit 2MSPS SAR ADC with Double Passive Noise-Shaping Calibration

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A 62.5 Khz-Bw 92 Db-Sndr Noise-shaping SAR ADC with NS-CAL Method

A 13-Bit ENOB Third-Order Noise-Shaping SAR ADC Employing Hybrid Error Control Structure and LMS-Based Foreground Digital Calibration

A Low Power Noise-Shaping SAR ADC with Improved Integrator and Hybrid DAC Mismatch Mitigation Technique

An Oversampling SAR ADC With DAC Mismatch Error Shaping Achieving 105 dB SFDR and 101 dB SNDR Over 1 kHz BW in 55 nm CMOS

A 10-Bit 20-Ms/s SAR DAC Achieving 57.9-Db SNDR Using Insensitive Geometry DAC Array.

A 3.07mw 30Mhz-Bw 73.5Db-Sndr Time-Interleaved Noise-Shaping SAR ADC with 2Nd-Order Error-Feedforward and Redundancy-Bit Reduction

An 84dB-SNDR 1-0 Quasi-MASH NS SAR with LSB Repeating and 12-bit Bridge-Crossing Segmented CDAC

9.3 A 40Khz-Bw 90Db-Sndr Noise-Shaping SAR with 4× Passive Gain and 2Nd-Order Mismatch Error Shaping

A 102.1-dB SNDR oversampling merge-mismatch-error-shaping SAR ADC in 180 nm CMOS

A 3.07 Mw 30 MHz-BW 73.2 Db-Sndr Time- Interleaved Noise-Shaping SAR ADC with Self-Coupling Second-Order Error-Feedforward

A Third-Order Noise-Shaping SAR ADC with Signal Attenuation Slightly

An Improved Foreground Calibration Method for Capacitor Mismatch in NS-SAR ADC

An 11b 80ms/s SAR ADC with Speed-Enhanced SAR Logic and High-Linearity CDAC

A Second-Order Noise-Shaping SAR ADC with Passive Integrator and Tri-Level Voting

A Vector Pair Based DWA Algorithm for Linearity Enhancement of CDACs in the NS-SAR ADC

An 18-Bit SAR ADC with Mixed DAC and Capacitive Recombination Calibration

A 78 dB 0.417 mW Second-Order NS SAR ADC with Dynamic Amplifier-Assisted Integrator

A 2.5-MHz BW, 75-dB SNDR Noise-Shaping SAR ADC With a 1st-Order Hybrid EF-CIFF Structure Assisted by Unity-Gain Buffer