Abstract:The pipelined-SAR ADC has become popular in wide-bandwidth and high-resolution applications due to its power-efficient architecture [1]. In the pursuit of higher ADC speeds while maintaining precision and power efficiency, not only does the conversion time of the SAR sub-ADC need to be shortened, but also the speed and gain of residue amplifiers (RA) need to be enhanced. Conventional solutions to these two problems, including reducing the bit-cycling time of the SAR and increasing the RA bandwidth, often require extensive power costs, leading to a degraded power efficiency. To address the speed and gain challenges, three techniques are proposed in this work. First, a continuous-time SAR-assisted detect-and-skip (CTDAS) to parallelize the MSB conversion with ADC sampling, thus cutting down the $1^{\text{st}}$-stage sampling and conversion time by 35% when compared with a conventional detect-and-skip (DAS) technique. Second, an open-then-close correlated level shifting (OCCLS) technique applied in the residue amplifier, which significantly speeds up the first phase by open-loop amplification reusing the first two high-bandwidth stages of the RA. With the aid of a detect-and-cut loop, an optimal voltage gain in the first phase is obtained across PVT variations, thus realizing an >80dB equivalent RA open-loop gain $\left(\mathrm{A}_{\mathrm{EO}}\right)$ across PVT variations. Third, a hybrid static-floating ringamp architecture is implemented to improve the noise performance of the RA and to fit in well with the OCCLS scheme. Thanks to the techniques above, the 22nm prototype achieves 70.7dB SNDR under 200MS/s while consuming 2.0mW from a 0.9V supply. It measures a best energy efficiency of 177.7dB Schreier FoM with fs >150MS/s.

A Vector Pair Based DWA Algorithm for Linearity Enhancement of CDACs in the NS-SAR ADC

An 18-Bit 2MSPS SAR ADC with Double Passive Noise-Shaping Calibration

A Code-Pattern-driven Digital Background Calibration Technique for SAR ADCs

A 12-Bit 2.32gs/s Pipelined/sar Hybrid ADC with a High-Linearity Input Buffer.

A 62.5 Khz-Bw 92 Db-Sndr Noise-shaping SAR ADC with NS-CAL Method

9.3 A 40Khz-Bw 90Db-Sndr Noise-Shaping SAR with 4× Passive Gain and 2Nd-Order Mismatch Error Shaping

An Overview of Noise-Shaping SAR ADC: from Fundamentals to the Frontier

An Oversampling SAR ADC With DAC Mismatch Error Shaping Achieving 105 dB SFDR and 101 dB SNDR Over 1 kHz BW in 55 nm CMOS

A 0.37mm 2 250kHz-BW 95dB-SNDR CTDSM with Low-Cost 2 nd -order Vector-Quantizer DEM.

A Low Power Noise-Shaping SAR ADC with Improved Integrator and Hybrid DAC Mismatch Mitigation Technique

A 0.37mm<sup>2</sup> 250kHz-BW 95dB-SNDR CTDSM with Low-Cost 2<sup>nd</sup>-order Vector-Quantizer DEM

Dual cycle shift data-weighted averaging technique for multi-bit Sigma-Delta Modulators

A First-Order Noise-Shaping SAR ADC with PVT-Insensitive Closed-Loop Dynamic Amplifier and Two CDACs

A 2-Mw 70.7-Db SNDR 200-Ms/s Pipelined-SAR ADC Using Continuous-Time SAR-Assisted Detect-and-Skip and Open-Then-Close Correlated Level Shifting

Low-Complexity High-Order Vector-Based Mismatch Shaping in Multibit $\delta\sigma$ ADCs

A 13-ENOB Second-Order Noise-Shaping SAR ADC Realizing Optimized NTF Zeros Using the Error-Feedback Structure

A Second-Order Noise-Shaping SAR ADC with Passive Integrator and Tri-Level Voting

A Fully Dynamic Low-Power Wideband Time-Interleaved Noise-Shaping SAR ADC

A 20khz 87.2db SNDR 12.1µw NS SAR ADC Based on Quantization-Error-Matched RLSB-First Algorithm

28.1 A 0.46mW 5MHz-BW 79.7dB-SNDR noise-shaping SAR ADC with dynamic-amplifier-based FIR-IIR filter

9.1 A 2mW 70.7dB SNDR 200MS/s Pipelined-SAR ADC with Continuous-Time SAR-Assisted Detect-and-Skip and Open-then-Close Correlated Level Shifting.