Abstract:Noise-shaping (NS) SAR ADCs using passive loop filters have drawn increasing attention due to their simplicity, low power, zero static current, and PVT robustness. However, prior works show limited resolution (ENOB≤13b) due to two main challenges. The 1 st one is thermal noise. Passive loop filters cannot provide gain [1]. Hence, their suppression of the comparator noise is limited. In addition, every capacitor switching introduces extra kT/C noise. To reduce noise, a passive gain of 2 is realized in [2]. It also realizes passive voltage summation, which obviates the need for a multipath comparator, further reducing the comparator noise. Nevertheless, it uses small capacitors for residue sampling to minimize signal attenuation, leading to a large total kT/C noise of 20kT/C (C is the DAC size). Also, its NTF is mild (zero at 0.5), leading to limited SQNR benefit. The 2 nd challenge is DAC mismatch. Classic DEM is unsuitable for SARs with a high-resolution DAC due to excessive hardware cost. To reduce circuit complexity, Ref. [3] applies DEM only to the MSB part of the DAC, but the LSB part still produces considerable errors. The mismatch error shaping (MES) technique of [4] is well suited for high-resolution binary DACs due to low hardware complexity, but it has its own limitations. First, it can only achieve 1 st -order shaping with limited error suppression capability. Also, being 1 st -order, it has strong signal dependence and can produce considerable tones, especially at low input amplitudes. In addition, it suffers from signal range loss.

A 0.37mm<sup>2</sup> 250kHz-BW 95dB-SNDR CTDSM with Low-Cost 2<sup>nd</sup>-order Vector-Quantizer DEM

A 0.37mm 2 250kHz-BW 95dB-SNDR CTDSM with Low-Cost 2 nd -order Vector-Quantizer DEM.

A 200 Khz Bandwidth Ea Dac With A Spur Free Modulator

A 200 KHz Bandwidth ΣΔ DAC with a Spur Free Modulator

An 18-Bit High Performance Audio Sigma-Delta D/A Converter

An 18-Bit High Performance Audio Σ-Δ D/A Converter

Design of Analog Circuits in Multi-Bit Quantized Audio DAC

A 14-Bit 3-Gs/s DAC Achieving SFDR >63db Up to 1.4ghz with Random Differential-Quad Switching Technique

A 10.7-Μa 103-Db DR Hybrid Delta-Sigma Modulator for Sensing Applications

A 470μw 20Khz-Bw 107.3Db-Sndr Nested CT DSM Employing Negative-R-Based Cross-RC Filter and Weighted Multi-Threshold MSB-Pass Quantizer

20.5 A 76.6dB-SNDR 50MHz-BW 29.2mW Noise-Coupling-Assisted CT Sturdy MASH ΔΣ Modulator with 1.5b/4b Quantizers in 28nm CMOS

A 15Mhz-Bw 82.7Db-Sndr 98.8Db-Sfdr Pipelined MASH 2–2 CT DSM in 65nm CMOS

A 3.7mW 12.5MHz 81dB-SNDR 4th-Order CTDSM with Single-OTA and 2nd-Order NS-SAR

9.3 A 40Khz-Bw 90Db-Sndr Noise-Shaping SAR with 4× Passive Gain and 2Nd-Order Mismatch Error Shaping

A 74.5-dB Dynamic Range 10-MHz BW CT-ΔΣ ADC With Distributed-Input VCO and Embedded Capacitive- π Network in 40-nm CMOS

A 0.029MM2 17-FJ/Conv.-Step CT $\Delta\Sigma$ ADC with 2<sup>nd</sup>-Order Noise-Shaping SAR Quantizer

A 14-Bit 1.0-Gs/S Dynamic Element Matching Dac With > 80 Db Sfdr Up To The Nyquist

A 0.029-Mm2 17-Fj/conversion-step Third-Order CT $\delta\sigma$ ADC with a Single OTA and Second-Order Noise-Shaping SAR Quantizer

A 1.2 V 2.3 Μw 94.7 Db DR Delta-Sigma Modulator with Dynamic-Range Enhancement and Tri-Level CDAC

A 2MHz-BW 96.8dB-SNDR 98dB-SNR CT-Zoom ADC With Residue Feedforward, Redundancy and Fully LMS-Based Calibration

Design Tradeoffs for a CT- ADC With Hybrid Active-Passive Filter and FIR DAC in 40-nm CMOS