Abstract:The noise-shaping (NS) SAR ADC is an emerging hybrid architecture that achieves high resolution and power-efficiency simultaneously by combining the merits of the SAR ADC and the AIADC, making it attractive to sensor readout and healthcare applications. To implement NS, most prior works adopted the classic cascaded integrator feed-forward (CIFF) structure for noise filtering [1-5]. Opamp-based integrators were used in [1-3] to achieve a relatively sharp noise transfer function (NTF), but at the cost of power and scaling friendliness. Reference [4] demonstrated 2 <sup>nd</sup> -order NS using fully passive switched-capacitor (SC) integrators, but has limited NS and thermal noise performance. Reference [5] combines passive SC filters with a dynamic amplifier (D-amp) to achieve good noise and power, but is vulnerable to process-voltage-temperature (PVT) variations. In addition, no prior NS SAR has realized complex NTF zeros for optimum NS. This presents a need for an NS SAR ADC that can combine optimized NTF, power efficiency and PVT robustness. To overcome the limitations of existing work, instead of adopting the CIFF structure, this paper presents a 2 <sup>nd</sup> -order NS SAR ADC using an error-feedback (EF) structure. It highlights the capability of realizing optimized complex NTF zeros by simply using charge sharing summation, a passive SC FIR and a comparator-reused dynamic amplifier with PVT tracking. This work achieves sharp NS performance while maintaining both hardware and power efficiency merits of the NS SAR with improved robustness. The prototype chip, fabricated in 40nm CMOS, achieves a 79dB SNDR at an OSR of 8 using a 9b SAR, resulting in a peak Schreier FoM of 178dB.

A 0.029MM2 17-FJ/Conv.-Step CT $\Delta\Sigma$ ADC with 2<sup>nd</sup>-Order Noise-Shaping SAR Quantizer

A 0.029MM2 17-FJ/Conv.-Step CT $\Delta\Sigma$ ADC with 2 nd -Order Noise-Shaping SAR Quantizer

A 0.029-mm2 17-fJ/Conversion-Step Third-Order CT ADC With a Single OTA and Second-Order Noise-Shaping SAR Quantizer

A 0.029-Mm2 17-Fj/conversion-step Third-Order CT $\delta\sigma$ ADC with a Single OTA and Second-Order Noise-Shaping SAR Quantizer

An 18-Bit 2MSPS SAR ADC with Double Passive Noise-Shaping Calibration

A 0.0045 Mm2 31.5uw 312.5Khz-Bw 2Nd-Order Noise-shaping SAR ADC with a Dynamic-BulkSwitching Single-Transistor Amplifier

A Second-Order Noise-Shaping SAR ADC with Passive Integrator and Tri-Level Voting

A 13-ENOB Second-Order Noise-Shaping SAR ADC Realizing Optimized NTF Zeros Using the Error-Feedback Structure

A 13-Bit ENOB Third-Order Noise-Shaping SAR ADC Employing Hybrid Error Control Structure and LMS-Based Foreground Digital Calibration

A 2.5-MHz BW, 75-dB SNDR Noise-Shaping SAR ADC With a 1st-Order Hybrid EF-CIFF Structure Assisted by Unity-Gain Buffer

An 18.2μW 101.1dB DR Fully-Dynamic ΔΣ ADC with Partially-Feedback Noise-Shaping Quantizer and CLS-Embedded Two-Stage FIAs.

A 93.6-Db SNDR Fully Dynamic CT–DT Noise-Shaping SAR ADC with Closed-Loop Capacitively Coupled Two-Stage FIA

A 3.07 Mw 30 MHz-BW 73.2 Db-Sndr Time- Interleaved Noise-Shaping SAR ADC with Self-Coupling Second-Order Error-Feedforward

A 68 uW 31 kS/s Fully-Capacitive Noise-Shaping SAR ADC with 102 dB SNDR

An 18.2W 101.1dB DR Fully-Dynamic ADC with Partially-Feedback Noise- Shaping Quantizer and CLS-Embedded Two-Stage FIAs

A Fully Dynamic Low-Power Wideband Time-Interleaved Noise-Shaping SAR ADC

A 13.5-ENOB, 107-μW Noise-Shaping SAR ADC With PVT-Robust Closed-Loop Dynamic Amplifier

A 13.8-ENOB Fully Dynamic Third-Order Noise-Shaping SAR ADC in a Single-Amplifier EF-CIFF Structure with Hardware-Reusing Kt/c Noise Cancellation

A 73db SNDR 20ms/s 1.28mw SAR-TDC Using Hybrid Two-Step Quantization.

An 871 Nw 96.2 Db SNDR Pipelined Second-Order Noise-Shaping SAR ADC Employing Charge-Efficient CLS-Assisted Residue Amplifier

A 13-Enob 2nd-Order Noise-Shaping Sar Adc Realizing Optimized Ntf Zeros Using An Error-Feedback Structure