Abstract:A homogenized, supersaturated AlZnMgZr alloy was processed via severe plastic deformation (SPD) using a high-pressure torsion (HPT) technique for different revolutions at room temperature to obtain an ultrafine-grained (UFG) microstructure. The microstructure and mechanical properties of the UFG samples were then studied using transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and tensile and hardness measurements. The main purpose was to study the effect of shear strain on the evolution of the microstructure of the investigated alloy. We found a very interesting evolution of the decomposed microstructure in a wide range of shear strains imposed by HPT. While the global properties, such as the average grain size (~200 nm) and hardness (~2200 MPa) appeared unchanged, the local microstructure was continuously transformed. After 1 turn of HPT, the decomposed UFG structure contained relatively large precipitates inside grains. In the sample processed by five turns in HPT, the segregation of Zn atoms into grain boundaries (GBs) was also observed. After 10 turns, more Zn atoms were segregated into GBs and only smaller-sized precipitates were observed inside grains. The intensive solute segregations into GBs may significantly affect the ductility of the material, leading to its ultralow-temperature superplasticity. Our findings pave the way for achieving advanced microstructural and mechanical properties in nanostructured metals and alloys by engineering their precipitation and segregation by means of applying different HPT regimes.

Fabrication of Ultrafine Grained Al/Mg Multilayered Composite by High Pressure Torsion

Intermetallics Formed at Interface of Ultrafine Grained Al/Mg Bi-Layered Disks Processed by High Pressure Torsion at Room Temperature

Hardening Mechanism of Commercially Pure Mg Processed by High Pressure Torsion at Room Temperature

Evolution of Microstructure and Mechanical Properties of an As-Cast Mg-8.2gd-3.8y-1.0zn-0.4zr Alloy Processed by High Pressure Torsion

Microstructural Evolution and Mechanical Properties in Superlight Mg-Li Alloy Processed by High-Pressure Torsion

Analysis of Heterogeneities in Strain and Microstructure in Aluminum Alloy and Magnesium Processed by High-Pressure Torsion

The nanoscale mechanisms of strengthening and ductility enhancement in an Al–Mg–Si–Mn alloy on processing by high-pressure torsion

Microstructure Evolution during High-Pressure Torsion in a 7xxx AlZnMgZr Alloy

Nanostructure and related mechanical properties of an Al-Mg-Si alloy processed by severe plastic deformation

Microstructure and Mechanical Properties of Al-4Mg-0.3Cu Alloy after HPT and Postdeformation Annealing

Effect of hard plate rolling on microstructure and mechanical properties of Mg-9Al-1Zn-based composites reinforced with Ti-6Al-4V particles

Microstructure and Mechanical Properties of a Nanostructured Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr Supersaturated Solid Solution Prepared by High Pressure Torsion

Microstructural Evolution and Mechanical Strengthening Mechanism of the High Pressure Heat Treatment (HPHT) on Al-Mg Alloy

Quasicrystal phase evolution and mechanical properties of Mg-3.5Zn-0.6Gd alloy processed by high-pressure torsion

Microstructures and properties of graphene nanoplatelets reinforced Cu/Ti3SiC2/C nanocomposites with efficient dispersion and strengthening achieved by high-pressure torsion

Using direct high-pressure torsion synthesis to produce aluminium matrix nanocomposites reinforced with carbon nanotubes

Mechanical properties and microstructure evolution of VGCNF reinforced 7075Al composite during high pressure torsion

Exceptional Grain Refinement in a Mg Alloy During High Pressure Torsion Due to Rare Earth Containing Nanosized Precipitates

Evolution of Long-Period Stacking Ordered Structure and Hardness of Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr Alloy During Processing by High Pressure Torsion

Microstructure and mechanical behavior of Mg ZK60/Al 1100 composite plates fabricated by co-extrusion

Micro‐Embossing Formability of a Superlight Dual‐Phase Mg–Li Alloy Processed by High‐Pressure Torsion