Abstract:A comprehensive analysis of the Adhesion-Deformation, Elasto-hydrodynamic and Hydrodynamic friction models is presented, which describe different modes of lubrication in accordance with the Stribeck curve. The main provisions of these models are considered in conjunction with the Langmuir-BET theory of adsorption and Hertz's elastic-deformation theory of curvilinear contacts. It is shown that the revealed contradictions require their resolution, and the discovered multiple effects need a scientifically based interpretation. It is proposed to develop a more generalized model of friction and wear based on naturally occurring processes that have been hidden from direct observations for a long time. These are: Extrusion of lubricating layers in the convergent elastically deformed and Rarefaction in divergent elastically deformed regions of tribo-contacts. Understanding these processes makes it possible to predict the localization sites and causes of the occurrence of primary subsequent acts of adhesion of friction surfaces and their wear in the following cycle: “rarefaction and desorption of lubricating layers, which leads to deformation destruction of oxide films and adhesion of juvenile surface areas, after which to tearing of a fragment material from the bearing and the neoplasm of the protrusion on the shaft - in the divergent elastically deformed areas of the contact. Then microcutting by this fragment of the bearing surface occurs with the release of the wear product in the convergent elastically deformed region, which accordingly leads to a change in the actual geometry and tension of the tribo-contact. Further, in other areas of the renewed contact, adhesive interaction occurs in other divergent areas according to the same mechanism. A deep understanding of the reasons for the desorption of lubricating layers will make it possible to develop and apply new highly efficient technological and material science methods in order to increase the resource of highly loaded tribo-systems of machines and mechanisms.

Effect of Fluid Pressure on Adhesive Wear of Spherical Contact

Evolution of Adhesive Wear and Friction in Elastic-Plastic Spherical Contact

An Advanced Efficient Model for Adhesive Wear in Elastic—plastic Spherical Contact

Numerical Investigation of Adhesive Wear and Static Friction Based on the Ductile Fracture of Junction

Theoretical and Experimental Exploration on the Micro Asperity Contact Load Ratios and Lubrication Regimes Transition for Water-Lubricated Stern Tube Bearing

Effect of thermo-elastic deformation on lubricated point contacts

Modeling Contact of Au-coated Sphere with Rigid Flat: Electrical Contact Resistance, Adhesive Wear and Friction

Adhesion-Deformation-Hydrodynamic model of friction and wear

A FRACTURE-INDUCED ADHESIVE WEAR CRITERION AND ITS APPLICATION TO THE SIMULATION OF WEAR PROCESS OF THE POINT CONTACTS UNDER MIXED LUBRICATION CONDITION

Abrasive Wear Model for Lubricated Sliding Contacts

Frictional Behaviour of Engineering Surfaces in Overall Lubrication Regimes of Point Contacts

Numerical Analysis on the Effect of Transverse Surface Roughness in Non-Newtonian Fluid Lubrication

Effects of distribution density and location of subsurface particles on elastohydrodynamic lubrication

Extrusion and Rarefaction of Lubricant in Boundary Layer is the Key Processes of Adhesive Wear of Highly Loaded Tribocontacts

Finite element simulation and experimental test of the wear behavior for self-lubricating spherical plain bearings

Numerical model of boundary lubrication under point contacts

A lubricated wear model for determining wear surface geometry on journal-bearing surfaces

Effects of Surface Roughness on Sliding Friction in Lubricated-Point Contacts: Experimental and Numerical Studies

Finite Element Analysis of Damage Evolution of Solid Lubrication Film in Rolling–Sliding Contact

The Fem Analysis Of Rolling-Sliding Contact Under Boundary Lubrication'S

Adhesive Wear Regimes on Rough Surfaces and Interaction of Micro-contacts