Criteria for Occurrence of Self-Leveling in the Debris Bed

Bin Zhang,Togoro Harada,Daisuke Hirahara,Tatsuya Matsumoto,Koji Morita,K. Fukuda,Hidemasa Yamano,Tohru Suzuki,Yoshiharu Tobita

2009-01-01

Abstract:In core disruptive accidents of sodium-cooled fast reactor, core debris may settle on core-support structure or in the lower inlet plenum of the reactor vessel as consequence of rapid quenching and fragmentation of molten core materials into subcooled sodium. Self-leveling of debris beds can be driven under conditions of coolant boiling within the debris beds, and its behavior has significant effects on heat-removal capability of debris beds. In the present study, criteria for occurrence of self-leveling were developed based on a force balance model for a single-sized spherical particle bed. In this model, drag force, buoyancy force and gravity acting on a particle were taken into consideration. The model applicability was verified using a series of self-leveling experiments with simulant materials. Although the decay heat from fuel debris drives the coolant boiling in reactor accident conditions, the present experiments were conducted by employing depressurization boiling of water to simulate axially increasing void distribution in a debris bed instead of conventional heating or gas injection from the debris bottom. Particle size (0.5 - 6 mm), particle shape (sphere and non-sphere), particle density (alumina, zirconia and stainless steel), boiling intensity and bed volume were taken as experimental parameters to obtain general characteristics of self-leveling behaviors. Good agreements on self-leveling occurrence were obtained between model predictions and experimental results. Extrapolation of the present model was also discussed against reactor conditions. (author)