Abstract:A severe accident involving core melt in a nuclear reactor is a major concern especially after Fukushima. Thus, to mitigate the effects of core melt accidents, an ex-vessel core catcher is being developed for Advanced Indian Nuclear Reactors. The core catcher design envisages using special refractory material. The cooling strategy of the core catcher is one of the key components in the design of the core catcher. Performing a full-scale prototypic experiment is extremely challenging and prohibitory due to the involvement of very high temperature and presence of radioactive materials. Therefore, a computational fluid dynamics (CFD) model capable of simulating the coolability of the melt pool is important to develop. In the present work, a two-dimensional (2D) CFD model was developed to understand the heat transfer phenomenon and solidification of the heat-generating simulant melt pool. The 2D symmetry geometry of the simulated core catcher vessel was used. The CFD model considers appropriate models for melting and solidification to understand crust formation in the melt pool and the k-ε turbulence model to resolve turbulence inside the melt pool. A decay heat of 1 MW/m 3 was also considered inside the melt pool. The CFD simulation results were compared with the authors' experimental results. The experiment involved a scaled-down ex-vessel core catcher model (CCM) employing electrical heaters to simulate decay heat. The experiment was carried out by melting about 25 L of sodium borosilicate glass using a cold crucible induction furnace at about 1200°C and cooling it in the scaled-down CCM. The scaled-down CCM was strategically cooled in three phases, namely, air cooled, indirect side cooling, and complete top flooding. To overcome the complexities of simulation of the initial melt pour condition, the CFD simulation was initialized with the temperatures just after the melt pour was completed in the experiment. Similar to the experimental conditions, the CFD simulations were carried out in three phases by changing the boundary condition. Comparison of the temperatures of the melt pool by the CFD simulations and experiments at different locations gave reasonable agreement. The evolution of crust formation, melt pool temperatures, core catcher inner wall temperatures, and heat flux distribution were investigated in detail using the CFD model.

STAR-CCM+ simulation of debris bed formation in the unheated DEFCON-S experiment

Steady-state Simulation of Core-Annulus Flow in a Circulating Fluidized Bed (CFB) Riser

From debris bed formation to self-leveling behaviors in core disruptive accident of sodium-cooled fast reactor

Coolability of a Corium Pool in a Debris Bed: Impact of Debris Size, Steam, and Liquid Flow Rate; Tilting Angle; and Pressure on Critical Heat Flux—First Numerical Evaluations

Simplified model for efficient calculation of debris bed melting process in the hypothetical severe accident of HPR1000

Study on Heat Transfer Behavior of a Rectangular Particle Bed with Volumetric Heating

Numerical investigation of cooling ability in heat-generating porous debris bed after severe accident in PWR

Self-leveling Behavior of Mixed Solid Particles in Cylindrical Bed Using Gas-Injection Method

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

CFD-DEM Modeling of Rod-Like Particles in a Fluidized Bed with Complex Geometry

Integrated Gas and Solid Model to Determine the Flow Performance in the SCR Reactor

Influence of Solid–fluid Interaction on Impact Dynamics Against Rigid Barrier: CFD–DEM Modelling

CFD Modeling and Analysis of a Heat-Generating Melt Pool Under External Vessel Cooling and Top Flooding

CFD Simulation of Melt Pool Coolability in a Simulated Core Catcher Model

Assessment of CFD Predictions Using Experiments from a Heated Gas-Cooled Pebble Bed Facility

THE MODEL DEVELOPMENT AND VALIDATION OF DEBRIS BED REMELTING AND MOLTEN POOL FORMATION AFTER SEVERE ACCIDENT IN PWR

Fluid-structure Interaction Analysis of a Hypothetical Core Disruptive Accident in LMFBRs

Coupled AC 2 -CFD simulations for a high-pressure core melt accident scenario

Analysis of Ex‐Vessel Debris Coolability of Boiling Water Reactors

Analysis of heat transfer and solidification within CANDU corium

Numerical Investigations of Liquid Film Offtake by Transverse Gas Flow in a Downcomer Annulus Geometry