Abstract:It is well known that titanium and some titanium alloys creep at ambient temperature, resulting in a significant fatigue life reduction when a stress dwell is included in the fatigue cycle. It is thought that localised time dependent plasticity in 'soft' grains oriented for easy plastic slip leads to load shedding and an increase in stress within a neighbouring 'hard' grain that is poorly oriented for easy slip. Quantifying this time dependent plasticity process is key to successfully predicting the complex cold dwell fatigue problem. In this work, synchrotron X-ray diffraction during stress relaxation experiments was performed to characterise the time dependent plastic behaviour of commercially pure titanium (grade 4). Lattice strains were measured by tracking the diffraction peak shift from multiple plane families (21 diffraction rings) as a function of their orientation with respect to the loading direction. The critical resolved shear stress, activation energy and activation volume were established for both prismatic and basal slip modes by fitting a crystal plasticity finite element model to the lattice strain relaxation responses measured along the loading axis for three strong reflections. Prismatic slip was the easier mode having both a lower critical resolved shear stress (<math>τcbasal=252</math>MPa and<math>τcprism=154</math>MPa) and activation energy (<math>ΔFbasal=10.5×10−20J=0.65eV</math> and<math>ΔFprism=9.0×10−20J=0.56eV</math>). The prism slip parameters correspond to a stronger strain rate sensitivity compared to basal slip. This slip system dependence on strain rate has a significant effect on stress redistribution to hard grain orientations during cold dwell fatigue.

Development of a Micromechanic Theory of Constitutive Relations of Polycrystalline Solids

Research on Multiaxial Creep Properties of P92 Steel Based on Improved KR Creep Constitutive Model

Modeling the Strain Rate-Dependent Constitutive Behavior in Nanotwinned Polycrystalline Metals

A finite strain micromechanical-based constitutive model: Application to porous polycrystal

Probing the constitutive behavior of microcrystals by analyzing the dynamics of the micromechanical testing system

Recoverable Creep Deformation and Transient Local Stress Concentration Due to Heterogeneous Grain-Boundary Diffusion and Sliding in Polycrystalline Solids

Constitutive Modelling of Plasticity of Fcc Metals under Extremely High Strain Rates

A Crystal Plasticity-Based Creep Model Considering the Concurrent Evolution of Point Defect, Dislocation, Grain Boundary, and Void

Creep-fatigue interactions in a polycrystalline structural material under typical high-temperature power plant operating conditions

Theoretical plastic stress-strain relationship of a polycrystal and the comparisons with the von Mises and the Tresca plasticity theories

Characterisation of microstructural creep, strain rate and temperature sensitivity and computational crystal plasticity in Zircaloy-4

A Conventional Theory of Strain Gradient Crystal Plasticity Based on the Taylor Dislocation Model

An Atomistic Study of Diffusion-Mediated Plasticity and Creep using Phase Field Crystal Methods

Thermodynamic Micromechanism and Constitutive Equation of Mechanics Properties for Crystal Materials II. the Part about Plasticity

An Analytical Method for Predicting Direct Tensile Creep Fracture in Brittle Solids Containing Initial Microcracks

The development of creep damage constitutive equations for high Cr steel

Combined crystal plasticity and grain boundary modeling of creep in ferritic-martensitic steels: I. Theory and implementation

Microstructure and flow stress of polycrystals and single crystals

Constitutive modelling of coupled creep deformation and age hardening behavior of aluminum alloys under various thermal and mechanical loadings

Microscale crystal slip and macroscopic cold creep transition in dwell fatigue

Cold creep of titanium: Analysis of stress relaxation using synchrotron diffraction and crystal plasticity simulations