Abstract:This study aims to explore the influence of various aging temperatures on the microstructure and mechanical properties of TC21 forgings. Basket-weave microstructures were prepared via quasi-β forging followed by annealed at 900 °C for 1.5 h and aged at 530 °C, 560 °C, and 590 °C for 4 h, and then their tensile performance, impact toughness, and fracture toughness were examined. Results indicate that higher aging temperatures not only facilitate the segregation of Al element, resulting in a reduction in the effective size (dα laths , the width/length ratio) of primary α laths (α laths ) and their amount, but also promote phase transition, inducing an increase in the effective size (dα fine ) of secondary fine α (α fine ) lamellae. While both dα laths −1/2 and dα fine −1/2 have a linear relationship with the strength, which was analyzed using the Hall–Petch relationship, the more pronounced interface strengthening effect and hindering crack propagation mainly results from the α laths . Moreover, the plasticity declines significantly as the proportion of the α laths phases decreases. Thus, for strength and plasticity, the α laths are a much more important factor than the α fine lamellae. However, although the synergistic deformation and fracture of both the α laths and α fine phases can consume a larger impact initiation energy, the enhancement of the impact energy of the alloy is primarily related to a high precipitation amount of the α fine lamellae. Furthermore, the decrease in dα laths promotes the misorientation and accumulation of dislocations between α laths interfaces, hindering the enhancement of K IC (fracture toughness) by forming transgranular fractures. Conversely, the increase in K IC attributed to the energy consumed in the plastic deformation region at the crack tip, due to the α fine lamellae compensates for the energy, resulting in a reduction in the crack propagation path. Therefore, the α fine lamellae may play a more crucial role in increasing the toughness of alloys, in particular the impact toughness of the TC21 alloy.

Tailoring Carbon Distribution in Α/γ Phase of Ductile Iron and Its Effects on Thermal Conductivity

Development of New Ductile Iron with Super-High Thermal Conductivity and Elongation

Effect of Graphite Morphology on the Tensile Strength and Thermal Conductivity of Cast Iron

Microstructure evolution of heavy section ductile iron

Microstructure Feature of Friction Stir Processed Ductile Cast Iron

Effect of carbon content and microstructural refinement on the mechanical property of quenching-partitioning - tempering-treated steels

Microstructures, Compressive Residual Stress, Friction Behavior, and Wear Mechanism of Intensive Quenched Ductile Iron

Effects of graphite nodule count on mechanical properties and thermal conductivity of ductile iron

Effects of Alloy Elements on Ductility and Thermal Conductivity of Compacted Graphite Iron

The Influence Of Cast Structure On The Austempering Of Ductile Iron. Part 3. The Role Of Nodule Count On The Kinetics, Microstructure And Mechanical Properties Of Austempered Mn Alloyed Ductile Iron

Effects of Inoculation on the Pearlitic Gray Cast Iron with High Thermal Conductivity and Tensile Strength

Effects of Alloying Elements on Thermal Conductivity of Pearlitic Gray Cast Iron

On the Morphology Variation of Graphite in Ductile Cast Iron through Severe Plastic Deformation

Effect of aging temperatures on the microstructure and mechanical properties of TC21 forgings with basket–weave microstructure

Effects of Titanium, Cerium or Aluminum Addition on Microstructure and Mechanical Properties of Ductile Iron Castings

Revealing the strength and toughness mechanisms of ductile iron in three heat‐treatment processesUntersuchung der Festigkeits‐ und Zähigkeitsmechanismen von duktilem Eisen in drei Wärmebehandlungsverfahren

Tempering temperature dependence on the microstructure, mechanical properties and wear behaviour of a novel high chromium cast iron

Mechanical and tribological behavior of dual-phase ductile iron with different martensite amounts

Effect of cyclic quenching treatment on microstructural evolution and properties of ductile cast iron

Fuzzy Neural Network Analysis on Gray Cast Iron with High Tensile Strength and Thermal Conductivity

The Variation in Microstructure and Thermal Conductivity of a Plate-Like Al-Fe-Ni High-Pressure Die Casting