Abstract:The N-doped carbon material is one of the most efficient adsorption materials in the field of carbon capture. Although many N-doped carbon materials have been prepared for CO2 adsorption in recent years, the promotion mechanism of N-doping has not been clearly proposed. In this study, a series of N-doped biochars were suc-cessfully prepared by a facile solvent-free method. Among them, the biochar prepared with corncob powder, K2CO3 and urea at 800 degrees C showed the highest adsorption capacity (5.69 mmol/g at 0 degrees C and 1 bar) and selectivity (38.24 at CO2/N2 = 10/90). The biochar also exhibited excellent thermal stability and cycle performance. Notable, correlation analysis showed that ultra-micropores were the decisive factor for CO2 adsorption at low temperatures; nevertheless, the effect of N-doping would gradually appear with the increase of adsorption temperature. By fitting the kinetics of CO2 adsorption, it was found experimentally that N-doping could increase the activation energy between biochar and CO2. Next, through constructing biochar models with different ni-trogen contents and different N-doping forms, it was found from theoretical calculation that N-doping could increase the adsorption energy between CO2 and biochar. Further theoretical analysis found that N-doping mainly enhanced the dispersion interaction between the biochar surface and CO2 to improve the adsorption performance, and the higher the nitrogen content, the more obvious the improvement. This work not only prepared a N-doped biochar with excellent CO2 adsorption performance from waste biomass, but also revealed the promotion mechanism of N-doping in detail by combining theoretical calculations with experiments.

Facile Preparation of Nitrogen-Doped Microporous Carbon from Potassium Citrate/urea for Effective CH4 Separation and Uptake

Enhanced N-doped Porous Carbon Derived from KOH-Activated Waste Wool: A Promising Material for Selective Adsorption of CO2/CH4 and CH4/N2

Ultramicroporous Carbon with Extremely Narrow Pore Distribution and Very High Nitrogen Doping for Efficient Methane Mixture Gases Upgrading

Facile preparation of N-doped porous carbon and its CO2 gas adsorption performance

Carbon nanofibers with gas selective layer containing rich and accessible ultramicropores for methane/nitrogen separation

In-situ Preparation of Nitrogen-Doped Unimodal Ultramicropore Carbon Nanosheets with Ultrahigh Gas Selectivity

Nitrogen-Doped Ultrahigh Microporous Carbons Derived from Two Nitrogen-Containing Post-Cross-Linked Polymers for Efficient CO2 Capture

Microporous Carbon Adsorbents Prepared by Activating Reagent-Free Pyrolysis for Upgrading Low-Quality Natural Gas

Preparation of ultramicroporous volume carbon using high-speed ball-milling and its selective adsorption of CH 4 in low-concentration coalbed methane

Heteroatom-doped Porous Carbon Microspheres with Ultramicropores for Efficient CH4/N2 Separation with Ultra-High CH4 Uptake

N-rich chitosan-derived porous carbon materials for efficient CO2 adsorption and gas separation

Preparation of ultramicroporous volume carbon using high-speed ball-milling and its selective adsorption of CH4 in low-concentration coalbed methane

A Stable Cu(I)-Based Ultramicroporous NKMOF-8-Br with High CH 4 Uptake for Efficient Separation of CH 4 /N 2 Mixtures

Enhancement of CH 4 /N 2 separation capacity of coal-based porous carbons via hydrothermal coupled KOH activation

High yield nitrogen-doped carbon monolith with rich ultramicropores prepared by in-situ activation for high performance of selective CO2 capture

Construction of Ultramicropore-Enriched N-doped Carbons for CO2 Capture: Self-decomposition of Polyethyleneimine-Based Precursor to Promote Pore Formation and Surface Polarity

Sustainable Biomass Glucose-Derived Porous Carbon Spheres with High Nitrogen Doping: As a Promising Adsorbent for CO2/CH4/N2 Adsorptive Separation

An Efficient Biochar Adsorbent for CO2 Capture: Combined Experimental and Theoretical Study on the Promotion Mechanism of N-doping

Modulated Synthesis of N-doped Porous Carbons Via Rational Design of the Poly(ionic Liquid) Precursors Towards Efficient CO2 Separation

Microstructure effect of carbon materials on the low-concentration methane adsorption separation from its mixture with nitrogen

The fabrication of porous N-doped carbon from widely available urea formaldehyde resin for carbon dioxide adsorption