Abstract:The red clay is widely distributed in Guizhou province, which is characterized by high natural moisture content, difficult compaction and serious shrinkage and crackingin, and phosphogypsum is discharged for 5 million tons every year in Guizhou province. For the sake of effectively reducing the accumulation of phosphogypsum, mixtures were prepared with cement as a curing agent and mass ratios of cement to phosphogypsum of 1:1, 1:2 and 1:3 (low content phosphogypsum group) and phosphogypsum to red clay of 1:1, 1:2 and 1:3 (high content phosphogypsum group). Unconfined compressive strength, expansion, shrinkage and dynamic characteristic tests were conducted to analyze the behavior and mechanical properties of the mixtures. The modification mechanism of the mixtures by phosphogypsum was further explored by XRD (X-ray diffraction) and SEM (scanning electron microscopy). which provided a theoretical basis for the application of phosphogypsum in highway engineering and improved the engineering properties of red clay. The results show that the unconfined compressive strength of the phosphogypsum stabilized soil in the low content phosphogypsum group is greater than that in the high content phosphogypsum group. When cement:phosphogypsum = 1:2.2–1:3, the unconfined compressive strength of the mixture is maximum. When cement:phosphogypsum = 1:3, the maximum dynamic shear modulus of phosphogypsum stabilized soil is the largest. The absolute expansion rate and linear shrinkage rate of phosphogypsum stabilized soil in the low content phosphogypsum group are greater than those in the high content phosphogypsum group. When cement: phosphogypsum = 1:1–1:3, the absolute expansion rate is 6.5–12.3%, and the linear shrinkage rate is 1.3–2%. When red clay:Phosphogypsum = 1:1–1:3, the absolute expansion rate is 0.2–4%, and the linear shrinkage rate is 1–1.5%. The more phosphogypsum content, the smaller the expansion deformation and shrinkage deformation of the mixture. It is suggested that mass ratios of phosphogypsum to red clay is 1:1, and the cement content is 5%. Which can not only make full use of phosphogypsum solid waste, but also improve the engineering properties of red clay.

Evolution in Macro-Micro Properties of Cement-Treated Clay with Changing Ratio of Red Mud to Phosphogypsum

Collaborative effects of red mud and phosphogypsum on geotechnical behavior of cement-stabilized dredged clay

Mechanical and microstructural properties of cement-treated marine dredged clay with red mud and phosphogypsum

Fundamental Mechanical Behavior of CMMOSC-S-C Composite Stabilized Marine Soft Clay

Stabilization Nature and Unified Strength Characterization for Cement-Based Stabilized Soils

Reuse of Pretreated Red Mud and Phosphogypsum as Supplementary Cementitious Material

Use of recycled gypsum in the cement-based stabilization of very soft clays and its micro-mechanism

Influences of pretreatment methods on the mechanical and environmental behaviors of PG-GGBS-LM ternary stabilizer

Experimental Study on Mechanical Properties of Soft Clay Stabilized by Industrial By-Products

Al2O3/SO3 molar ratio of PG-CAC-based binders on the macro-micro properties of cement-treated waste dredged clay

Research on Road Characteristics and the Microscopic Mechanism of Lime–Phosphogypsum-Stabilized Red Clay

Engineering Properties and Microstructure of Soils Stabilized by Red-Mud-Based Cementitious Material

Investigation on properties and mechanism of non-calcined Bayer red mud-phosphogypsum cementitious binder

Effects of phosphogypsum on hydration properties and strength of calcium aluminate cement

Optimization of synergy between cement, slag, and phosphogypsum for marine soft clay solidification

Mechanical properties and modification mechanism of phosphogypsum stabilized soil

Thermal and Mechanical Properties Enhancement of Cement Mortar using Phosphogypsum Waste: Experimental and Modeling Study

Microstructure and Key Properties of Phosphogypsum-Red Mud-Slag Composite Cementitious Materials

Application of phosphogypsum to solidification of silty soil: Mechanical properties and microstructure