Abstract:In nuclear engineering, the occurrence of critical heat flux (CHF) is complicated for rod bundle, and it is much more difficult to predict the CHF when it is in natural circulation under motion condition. In this paper, the dryout-type CHF is investigated for the rod bundle in a natural circulation loop under rolling motion condition based on the coupled analysis of subchannel method, a one-dimensional system analysis method and a CHF mechanism model, namely the three-fluid model for annular flow. In order to consider the rolling effect of the natural circulation loop, the subchannel model is connected to the one-dimensional system code at the inlet and outlet of the rod bundle. The subchannel analysis provides the local thermal hydraulic parameters as input for the CHF mechanism model to calculate the occurrence of CHF. The rolling motion is modeled by additional motion forces in the momentum equation. First, the calculation methods of the natural circulation and CHF are validated by a published natural circulation experiment data and a CHF empirical correlation, respectively. Then, the CHF of the rod bundle in a natural circulation loop under both the stationary and rolling motion condition is predicted and analyzed. According to the calculation results, CHF under stationary condition is smaller than that under rolling motion condition. Besides, the CHF decreases with the increase of the rolling period and angular acceleration amplitude within the range of inlet subcooling and mass flux adopted in the current research. This paper can provide useful information for the prediction of CHF in natural circulation under motion condition, which is important for the nuclear reactor design improvement and safety analysis.

Rationalization and evaluation of a Phenomenon-driven improved bundle CHF model under PWRs condition with different axial power distributions

Model Simplification of Nuclear Power Plant for Power System Dynamic Simulation

Assessment of a Theoretical Model for Predicting Forced Convective Critical Heat Flux in Rod Bundles

Mechanistic Model of Critical Heat Flux in Rod Bundles Based on a High-Precision Subchannel Code

Investigation on Rod Bundle CHF Mechanistic Model for DNB and DO Prediction Under Wide Parameter Range

A Mechanistic Bubble Crowding Model for Predicting Critical Heat Flux in Subchannels of a Bundle

Critical Power and Void Fraction Prediction of Tight Bundle Designs

Applicability Research of Round Tube CHF Mechanistic Model in Rod Bundle Channel

Investigation on the Critical Heat Flux in Typical 5 by 5 Rod Bundle at Conditions Prototypical of PWR Based on CFD Methodology

CFD Investigation of the Cold Wall Effect on CHF in a 5 × 5 Rod Bundle for PWRs

A Phenomenological CHF Model for Mixing-Vane Spacers in a Subchannel of a Rod Bundle

Fluid-to-fluid Modeling of Critical Heat Flux in 4×4 Rod Bundles

Review of the AFD-type CHF Mechanistic Model and Its Application to Rod Bundle

Prediction of critical heat flux in rod bowing geometries by coupled subchannel analysis and mechanistic model

Research on prediction of non-uniform heated rod bundle CHF based on subchannel analysis code coupling modified mechanistic model

Prediction of Dryout-Type CHF for Rod Bundle in Natural Circulation Loop under Motion Condition

Uniform Versus Nonuniform Axial Power Distribution in Rod Bundle CHF Experiments

Numerical Investigation on Boiling Crisis in a Full-Length 5 × 5 Fuel Assembly under Typical Pressurized Water Reactor Conditions

The reduced-order model of 5 × 5 fuel rod bundles

New Models of Droplet Deposition and Entrainment for Prediction of CHF in Cylindrical Rod Bundles

Researches in the Flow Modeling of Critical Heat Flux in Bundle