Abstract:When metal connecting board of solid oxide electrolysis cell (SOEC) are used for long time in a medium-to-high temperature environment (600～800 ℃), severe surface oxidation increases the internal resistance of the electrolytic cell, and the volatilization of Cr from the metal substrate reduces the electrochemical activity of the electrode. The combined effect of the two leads to severe degradation of the performance of SOEC. In response to the above problems, Mn-Co coating and Mn-Co-La coating were prepared on commercial SUS430 metal substrate by electrophoretic deposition method. Subsequently, with using the process of successively sintering under neutral atmosphere (950 ℃, N2) and oxidizing atmosphere (825 ℃, air) conditions, the strong and dense Mn-Co coatings and Mn-Co-La coatings were obtained. Moreover, the effects of sintering atmosphere and La element doping on coating properties were studied. The morphology, phase composition, element distribution and area specific resistance of the coatings were characterized by scanning electron microscope, X-ray diffractometer, energy spectrometer and four-probe resistivity tester, respectively. Results showed that the coating prepared by electrophoretic co-deposition doping with trace amounts of nano-La2O3 had more uniform and refined grains, which effectively inhibited the overflow of Fe-Cr from the substrate during high-temperature N2 sintering. The results of the 300 h oxidation cycle test at 750 ℃ indicated that compared with the substrate, the sintering process proposed in this work was beneficial to improving the anti-oxidation performance of the coating, and the La-doped coating possessed better performance. Furthermore, the doping of La element effectively slowed down the volatilization of Cr in the substrate, which made the area specific resistance lower and more stable, and improved the high-temperature oxidation resistance of the Mn-Co spinel coating.

Exploring the Effects of Mn Content in the Mn-Co Spinel Coating on Its Formation and Slowing the Outward Cr Diffusion

Evolution Of Microstructure During Annealing Of Mn1.5co1.5o4 Spinel Coatings Deposited By Atmospheric Plasma Spray

Anti-coking Effect of MnCr 2 O 4 Spinel Coating During Light Naphtha Thermal Cracking

Effect of yttrium on the oxidation resistance and areaspecific resistance of MnCo2O4 coating

The Microstructure and Conductivity Evolution of Plasma-Sprayed (Mn, Co)3O4 Spinel Coatings during Conductivity Measurements at Elevated Temperature

Effect of Co 3+ Doping on Crystal Structure and Electrochemical Properties of Spinel LiMn 2 O 4 Cathode Material

Low-cost, High-Density Mn–Co Spinel Coatings for Stainless Steel Interconnect Via Efficient Microwave Heating

Effect of Ar/O2 Ratio on Structure and Cationic Distribution of Mn1.56Co0.96Ni0.48O4±δ Spinel Films

Effect of Cr doping on LiMnO2

Design and competitive growth of different spinels at 750 °C for the multi-component CuCoMnFe alloy coatings

Effects of Preferred Orientation on Electrical Properties of Mn1.56Co0.96Ni0.48O4±δ Spinel Films

Study on the Spinel LiMn2O4 Coating with Cobalt Oxide

Oxidation mode on charge transfer mechanism in formation of Mn–Co–Ni–O spinel films by RF sputtering

Performance and In-Situ Densification of Mn-Co Spinel Coating on SUS430/441 Interconnect by Spraying Method

Preparation and Performance Evaluation of La Doped Mn-Co Spinel Coating on Connecting Board of Solid Oxide Electrolysis Cell

Promotional effect of Mn-doping on the structure and performance of spinel ferrite microspheres for CO hydrogenation

Study on Modification of Spinel LiMn2O4 by Overcoating

Fabricating a MnCo coating to improve oxidation resistance and electrical conductivity of Crofer22H alloy as SOFC interconnect

The effect of Na 0.44 MnO 2 formation in Na + -modified spinel LiMn 2 O 4

Oxidation behavior of Cu-doped MnCo 2 O 4 spinel coating on ferritic stainless steels for solid oxide fuel cell interconnects

Doping Effect of Cobalt,cerium and Magnesium to Spinel LiMn2O4 on Their Structures Character and Properties