Abstract:The poor structural stability and capacity retention of the high-voltage spinel-type LiNi0.5Mn1.5O4 (LNMO) limits their further application. Herein, Al and Co were doped in LNMO materials for a more stable structure and capacity. The LNMO, LiNi0.45Al0.05Mn1.5O4 (LNAMO) and LiNi0.45Co0.05Mn1.5O4 (LNCMO) were synthesized by calcination at 900°C for 8 h, which was called as solid-phase method and applied universally in industry. XRD, FT-IR and CV test results showed the synthesized samples have cation disordering Fd-3m space group structures. Moreover, the incorporation of Al and Co increased the cation disordering of LNMO, thereby increasing the transfer rate of Li+. The SEM results showed that the doped samples performed more regular and ortho-octahedral. The EDS elemental analysis confirmed the uniform distribution of each metal element in the samples. Moreover, the doped samples showed better electrochemical properties than undoped LNMO. The LNAMO and LNCMO samples were discharged with specific capacities of 116.3 mA·h·g-1 and 122.8 mA·h·g-1 at 1 C charge/discharge rate with good capacity retention of 95.8% and 94.8% after 200 cycles at room temperature, respectively. The capacity fading phenomenon of the doped samples at 50 °C and 1C rate was significantly improved. Further, cations doping also enhanced the rate performance , especially for the LNCMO, the discharge specific capacity of 117.9 mAh·g-1 can be obtained at a rate of 5C.

Effect of Cr doping on LiMnO2

Effect of Cr Doping on Structure of LiMnO2

Effect Of Chromium And Niobium Doping On The Morphology And Electrochemical Performance Of High-Voltage Spinel Lini0.5mn1.5o4 Cathode Material

Storage and cycling performance of Cr-modified spinel at elevated temperatures

Phase Transformations And Activation Characteristics Of Layered Orthorhombic Limno2 During Electrochemical Cycling

Effects of Doped Metal Ions of Different Oxidation States on Electrochemical Performance of LiMn_2O_4

Structure Change of Orthorhombic LiMnO2cathodes During Electrochemical Cycle for Rechargeable Lithium Battery

Effect of Co 3+ Doping on Crystal Structure and Electrochemical Properties of Spinel LiMn 2 O 4 Cathode Material

Correlating Cycle Performance Improvement and Structural Alleviation in LiMn2-xMxO4 Spinel Cathode Materials: A Systematic Study on the Effects of Metal-Ion Doping

Preparation of Submicrocrystal LiMn2O4 Used Mn3O4 As Precursor and Its Electrochemical Performance for Lithium Ion Battery

First-principles Studies of Cation-Doped Spinel LiMn 2 O 4 for Lithium Ion Batteries

Effects of Al and Co doping on the structural stability and high temperature cycling performance of LiNi0.5Mn1.5O4 spinel cathode materials

Impact of Cr Doping on the Voltage Fade of Li-Rich Mn-Rich Li 1.11 Ni 0.33 Mn 0.56 O 2 and Li 1.2 Ni 0.2 Mn 0.6 O 2 Positive Electrode Materials

Effect of Mn Doping on the Structure and Electrochemical Performance of LiNi0.7Co0.3O2

Effects of Al-doping on the Stabilization of Monoclinic LiMnO2

Surface Chromium Doping of Spinel LiMn_2O_4 for Li-ion Batteries at Elevated Temperature

Electrochemical Performances of Layered LiNi0.7CO0.3–xMxO2 (m=al, Mn, Cr; X=0.05) Cathode Materials for Rechargeable Lithium Batteries

The Effect of Cation Doping on Spinel Limn2o4: A First-Principles Investigation

Cr-doping effect on the structural, magnetic, transport properties and Raman spectroscopy of La(2+x)/3Sr(1-x)/3Mn1-xCrxO3 perovskites

Dual-doping to suppress cracking in spinel LiMn2O4: a joint theoretical and experimental study

Preparation of spinel LiNi 0.5 Mn 1.5 O 4 and Cr-doped LiNi 0.5 Mn 1.5 O 4 cathode materials by tartaric acid assisted sol–gel method