Abstract:Pressure-swing distillation (PSD) is an alternative configuration used to separate pressure-sensitive azeotropes and avoid product contamination(s) in extractive or heterogeneous azeotropic distillation via the entrainer(s). Full heat integration between high- and low-pressure columns (HPC and LPC) can provide significant energy savings compared to the conventional case, while it also loses the control degree of freedom, trim condenser or reboiler heat load, via the integrated condenser/reboiler exchanger. Typically, the pressure of HPC is left uncontrolled, and additional pressure-compensated control strategies are implemented, which may create safety issues. To address this, the study proposes adding an auxiliary cooling-water-driven condenser to the fully heat-integrated PSD system, providing an extra manipulated variable to regulate the pressure of HPC. Compared to the conventional PSD system, the new modified process could achieve a 26.31% reduction in total annual cost. The research uses the maximum-boiling azeotropic mixture of acetone/chloroform as a case study which makes the distillation system characterized by high reflux ratios and a large recycle flow rate, leading to the unwelcome snowball effect. To achieve effective process control, robust control structures are proposed that rigorously regulate the pressure of the column by manipulating the heat removal in the trim condenser, attenuating or eliminating potential overpressure issues. Product purity and other evaluation indicators, such as product transient deviations, offsets, integral absolute error, and oscillation degrees, are also considered. Results show that the proposed control schemes can efficiently control the pressure of HPC, weaken the snowball effect, and maintain product purity. This study highlights the importance of pressure control for fully heat-integrated PSD systems, particularly for pressure-sensitive azeotropes with small pressure-induced shifts.

Design and Control of a Fully Heat-Integrated Pressure-Swing Azeotropic Distillation System

Adding Rectifying/Stripping Section Type Heat Integration to A Pressure-Swing Distillation (psd) Process

Design and control of an ideal heat-integrated distillation column (ideal HIDiC) system separating a close-boiling ternary mixture

Control of fully heat-integrated pressure-swing distillation with strict pressure manipulation: A case study of separating a maximum-boiling azeotrope with small pressure-induced shift

Dynamic optimization of operation of heat-integrated distillation column systems

Design and Control of a Fully Thermally Coupled Distillation Column Modified from a Conventional System

Design and comprehensive analysis of a novel pressure-swing batch distillation process for the separation of a binary azeotrope with various boiling behaviors

Dynamics and Control Designs for Internal Thermally Coupled Distillation Columns with Different Purities, Part 2: Close Loop Analysis and Control Designs

Adaptive Temperature Control for Distillation Columns Based on Relative Stability in the Profile Pattern

Temperature profile movement investigation and application to a control scheme with corrected set-point for a heat integrated distillation column

Design Optimization and Operating Pressure Effects in the Separation of Acetonitrile/methanol/water Mixture by Ternary Extractive Distillation

Control of a Pressure-Swing Distillation Process for Benzene/isopropanol/water Separation with and Without Heat Integration

An ideal heat integrated distillation column and its static properties

Systematic Optimization Methodology for Simultaneous Process Design and Heat Exchanger Network Synthesis with Surrogate Models – Application to Distillation Column Complex

Design and Control of Dimethyl Carbonate–Methanol Separation Via Pressure-Swing Distillation

Pressure Swing Distillation: Heat Integration and Economics

Enviro-economic investigation of Novel heat-integrated configurations for pressure swing distillation

Energy saving design and optimization of pressure-swing assisted ternary heterogenous azeotropic distillations

A simulation study on selection of optimized process for azeotropic separation of methanol and benzene: Internal heat integration and economic analysis

Thermal-coupling-oriented integrated control and optimization of distillation process

A different strategy to reduce energy consumption for designing heterogeneous decanter-assisted advanced pressure-swing distillation process