Abstract:Recently, increasing researches have focused on the intensified heat-integrated triple-column pressure-swing extractive distillation (HITPED) owing to its superiority in economic and environmental benefits than the conventional extractive distillation. However, the dynamic controllability investigation for HITPED was lacking, resulting in the difficulties for industrial application. Therefore, separating the ternary azeotropic mixture tetrahydrofuran (THF)-methanol-water by HITPED is taken as an example to fully investigate the dynamic controllability. On the basis of the open-loop analysis a basic control structure CS1 is firstly proposed. To deal with the 20% disturbance in feed composition more effectively, the CS2 with a low selector and composition controllers is then developed. Nevertheless, composition controllers are less applied in chemical industry than temperature controllers owing to the long delay and high cost. As such, two different control structures (CS3 and CS4) without any composition controllers are then put forward. Integral absolute error (IAE) is applied to compare the dynamic performance. Under the 20% disturbances of the feed flowrate and composition, the robust control strategy CS4 with temperature controllers and a high selector exhibits the gratifying dynamic performance. The application of the selector further enlarges the dynamic researches in the distillation process.

Temperature profile movement investigation and application to a control scheme with corrected set-point for a heat integrated distillation column

Adaptive Temperature Control for Distillation Columns Based on Relative Stability in the Profile Pattern

Control Schemes of Internal Thermally Coupled Distillation Columns for Non-Ideal Mixtures

Experience-based Identification and Model Predictive Control for a Methanol Recovery Distillation Column

Nonlinear-Model-Based Control of a Heat Integrated Distillation Column Using Model Updating Based on Distributed Wave Velocity

Dynamics and Control of High Purity Heat Integrated Distillation Columns

Implementation Of Advanced Control For A Heat-Integrated Distillation Column System

Dynamics and Control Designs for Internal Thermally Coupled Distillation Columns with Different Purities, Part 2: Close Loop Analysis and Control Designs

Estimation of Time-Dependent Parameters of a Heat-Integrated Distillation Column System

Temperature Inferential Control of Heat‐Integrated Distillation Column Based on Variable Sensitive Stage Temperature Set‐point

Dynamic optimization of operation of heat-integrated distillation column systems

Development of Extended Generic Model Control for High-Purity Heat Integrated Distillation Column Using Online Concentration Estimation

Modeling, Control, and Optimization of Ideal Internal Thermally Coupled Distillation Columns

Design and Control of a Fully Thermally Coupled Distillation Column Modified from a Conventional System

Modeling and Control Design for Distillation Columns Based on the Equilibrium Theory

Advancing Control Paradigms in Heat-Integrated Distillation Columns: An MPC Perspective

Development of a partially accurate model and application to a reduced-order control scheme for heat integrated distillation column

Dynamic Optimization and Control Strategy of a Heat-Integrated Distillation Column System

The process control of the triple-column pressure-swing extractive distillation with partial heat integration

Control of Highly Heat-Integrated Energy-Efficient Extractive Distillation Processes

Compartmental modeling and solving of large-scale distillation columns under variable operating conditions