Abstract:The Kaibel column (KC) is considered to be energy effective and capital economical replacement of conventional distillation sequences for quaternary distillation. However, the industrialization of such a structure is still hesitant due to increased complexity and related uncertainties. Compared to the highly integrated KC, distillation configurations with liquid-only transfer streams (LTS) are more easily understandable and acceptable to the industrial community. A KC-LTS configuration is therefore investigated through an optimal design and controllability comparison to the conventional direct sequence (DS). When separation of aromatics is proposed as a case study, the results demonstrate the economic superiority of KC-LTS to DS in terms of the total annual cost. Considering the controllability using composition controllers, the former structure performs as favorable as the latter when tackling a +/- 20% step changes in throughput and feed composition. An inferential temperature control strategy is also established for KC-LTS. Good controllability is generally realized in most cases at handling relatively small (10%) throughput and feed composition disturbances, except for large product offsets when resisting large (20%) feed perturbations. To further improve its dynamic control effectiveness, an intensified control option with three composition control loops is successfully proposed to handle 20% step feed disturbances. Overall, this work expands LTS to quaternary distillation, suggesting a competitive substitute of the well-known KC for both academic and industrial purposes.

Design and Control of a Fully Thermally Coupled Distillation Column Modified from a Conventional System

Adaptive Temperature Control for Distillation Columns Based on Relative Stability in the Profile Pattern

Control Schemes of Internal Thermally Coupled Distillation Columns for Non-Ideal Mixtures

Design and control of an ideal heat-integrated distillation column (ideal HIDiC) system separating a close-boiling ternary mixture

Modeling, Control, and Optimization of Ideal Internal Thermally Coupled Distillation Columns

Dynamics and Control Designs for Internal Thermally Coupled Distillation Columns with Different Purities, Part 2: Close Loop Analysis and Control Designs

Temperature profile movement investigation and application to a control scheme with corrected set-point for a heat integrated distillation column

Empirical Modelling and Advanced Control of an Industrial Distillation Column

Modelling and Control Analysis of Dividing Wall Distillation Columns

Optimal design and effective control of Kaibel column with liquid-only transfer streams for quaternary distillation

OPERATIONAL DESIGN AND IMPROVEMENT OF CONVENTIONAL BATCH DISTILLATION AND MIDDLE-VESSEL BATCH DISTILLATION

Modeling and Control Design for Distillation Columns Based on the Equilibrium Theory

Thermal-coupling-oriented integrated control and optimization of distillation process

Design,simulation and optimization of fully thermally coupled distillation column

Control of Highly Heat-Integrated Energy-Efficient Extractive Distillation Processes

Design and Control of Extractive Dividing Wall Column for Separating Benzene/Cyclohexane Mixtures

Design and Control of a Novel Side-Stream Extractive Distillation Column for Separating Methanol-Toluene Binary Azeotrope with Intermediate Boiling Entrainer

Control and Profile Setting of Reactive Distillation Column for Benzene Chloride Consecutive Reaction System

Control Comparison of Conventional and Thermally Coupled Ternary Extractive Distillation Processes with Recycle Splitting Using a Mixed Entrainer As Separating Agent

Design, optimization, and control of reactive distillation column for the synthesis of tert-amyl ethyl ether

Eliminating the vapor split in dividing wall columns through controllable double liquid-only side-stream distillation configuration