Abstract:Owing to their superior high-temperature stability, SiC-based ceramic matrix composites are widely used in turbine engine components for launch vehicles and other applications in the aerospace industry. However, because of the deterioration that occurs in these materials in high-temperature wet operating environments, researchers have developed environmental barrier coating technologies to protect the substrate. In this study, a top coat was prepared using Yb2SiO5 and Yb2Si2O7 as the third-generation coating of a rare-earth silicate with high thermal, chemical, and mechanical stability in high-temperature environments above 1400 °C. A new bond coat was prepared, incorporating Si, whose thermal expansion coefficient is similar to that of the SiC substrate, and Hf, which is expected to significantly contribute to high-temperature stability. The coating was prepared by suspension plasma spraying rather than atmospheric plasma spraying to realize a fine coating particle structure; to densify the coating layers, secondary densification coatings were created using ytterbium (III) nitrate pentahydrate (Yb(NO3)3∙5H2O) and tetraethyl orthosilicate (C8H20O4Si). The prepared specimens were measured in terms of weight change and weight change ratio with respect to temperature under high-temperature flames (1400 ℃ and 1700 ℃). After the secondary densification coating, the microstructure of the specimen was observed to be denser and the surface layer of the coating exhibited crystallinity. For the tested samples, a decrease in weight was observed. The largest weight loss was observed under the 1700 ℃ flame.

Thermochemical Stability of Yb 2 Si 2 O 7 Environmental Barrier Coatings During Thermal Cycling and Water Vapor Corrosion at 1350 °C

Water Vapor Corrosion Behavior of Yb2SiO5 Environmental Barrier Coatings Prepared by Plasma Spray-Physical Vapor Deposition

Corrosion behavior and mechanism of ytterbium silicates environmental barrier coatings to thermal cycling in water vapor

Thermal cycling and steam corrosion behavior of Yb3Al5O12‐based multilayered environmental barrier coatings for SiCf/SiC

Thermal shock resistance and bonding strength of tri-layer Yb2SiO5/mullite/Si coating on SiCf/SiC composites

Corrosion behavior of PS-PVD spray Yb2Si2O7 environmental barrier coatings during continuous water vapor exposure

Thermal cycle and water oxygen performance of multi-layered Y3Al5O12/Yb2SiO5/Yb2Si2O7 thermal/environmental barrier coatings

Failure mechanism of ytterbium silicate/silicon bi-layer environmental barrier coatings on SiCf/SiC composites upon long-time water vapor and oxygen corrosion test

Structure, composition, and defect control during plasma spray deposition of ytterbium silicate coatings

Characterization of Yb2SiO5-based environmental barrier coating prepared by plasma spray–physical vapor deposition

Yb2SiO5-Yb2Si2O7 Gradient Environment Barrier Coating ： Rational Design and Corrosion Behavior in Water Vapor Environment at 1300 ℃

Oxidation resistance and thermal shock behavior of tri-layer Si/Si–Yb2SiO5/Yb2SiO5–SiC environmental barrier coatings at 1300 °C

Nanostructured Yb2SiO5/mullite-SiC/Si Environmental Barrier Coating with Long-Term Stability at 1250 °C

Undulating and Porous Structure Tuned Surface Cracking Behavior of Yb2Si2O7 Environmental Barrier Coatings Under Steam Cycling

High-temperature Oxidation Behavior and Mechanical Properties of PS-PVD Sprayed Yb2Si2O7 Environmental Barrier Coatings

High temperature corrosion behavior and the inhibition of apatite formation evolving from corrosion of (Y1−Yb )2SiO5 in water vapor environment

Water vapor corrosion behaviors of plasma sprayed ytterbium silicate coatings

Thermal durability of ytterbium silicate environmental barrier coating prepared by suspension plasma spray

Microstructure and Thermal Property Evolution of Plasma-Sprayed Lu2SiO5 EBCs Under High Temperature Environments

Comprehensive understanding of coupled stress characteristics in ytterbium disilicate environmental barrier coatings undergoing corrosion transformation and thermal cycling

Thermal shock behavior and oxidation resistance of novel SiC nanowires+Si/Yb2Si2O7-Si/Yb2Si2O7 environmental barrier coatings