Abstract:Ni–Cu under-bump metallisation (UBM) can reduce stress and improve wetting ability in technology for electronic packaging technology advances with three-dimensional integrated circuit (3D IC) devices. The bond between the Sn-based solder and Ni–Cu UBM is affected by the formation of intermetallic compounds (IMCs), specifically Ni3Sn4 and (Ni,Cu)3Sn4. This paper investigates the mechanical properties of IMCs, which are critical in assessing the longevity of solder joints. First-principles calculations were carried out to investigate the phase stability, mechanical properties and electronic structures of Ni3Sn4, Ni2.5Cu0.5Sn4, Ni2.0Cu1.0Sn4, and Ni1.5Cu1.5Sn4 IMCs. The calculated formation enthalpies show that the doping of Cu atoms leads to a decrease in the stability of the phases and a reduction in the mechanical properties of the Ni3Sn4 crystal structure. As the concentration of Cu atoms in the Ni3Sn4 cells increases, the bulk modulus values of (Ni,Cu)3Sn4 formed with different compositions decrease from 107.78 GPa to 87.84 GPa, the shear modulus decreases from 56.64 GPa to 45.08 GPa, and the elastic modulus decreases from 144.59 GPa to 115.48 GPa, indicating that the doping of Cu atoms into the Ni3Sn4 cells may adversely affect their mechanical properties and increase the possibility of microcracking at the interface during actual service. The anisotropy of (Ni,Cu)3Sn4 is more significant than that of Ni3Sn4, with Ni2.0Cu1.0Sn4 showing the highest anisotropy. After evaluating the electronic structures, the metallic properties of Ni3Sn4 and the Ni2.5Cu0.5Sn4, Ni2.0Cu1.0Sn4, and Ni1.5Cu1.5Sn4 phases are revealed by electronic structure analysis. The total density of states (TDOS) for (Ni,Cu)3Sn4 structures is mainly influenced by Ni-d and Cu-d states. The addition of Cu atoms can increase the brittleness of Ni3Sn4. In addition, the region where d and p hybridisation occurs gradually increases with increasing Cu content. The electronic properties suggest that the binding energy between Ni and Sn atoms weakens with the addition of Cu atoms, resulting in a decrease in the elastic modulus. This research can serve as a valuable reference and theoretical guide for future applications of these materials.

Potential Mechanisms of Interstitial Atomic Enhancement and Interface Failure Behavior in Ni3Co/Cu Systems

Potential Mechanisms of Interstitial Atomic Enhancement and Interface Failure Behavior in Ni 3 Co/Cu Systems

Novel Insights into Interstitial Atoms Synergistically Augmenting the Mechanical Characteristics of NiCo Coating and Interfacial Strength with Cu Substrate

Site preference of S-doping and its influence on the properties of a Ni/Ni3Al interface

Interface structure characterization and elements doping on interface bonding strength and tensile failure mechanism of NiCo coating/Cu matrix

First-principle Study of Interfacial Properties of Ni–Ni3Si Composite

A First-Principles Study on Interfacial Properties of Ni(001)/Ni3Nb(001)

Uncovering the influence mechanism of nonmetallic atoms on the mechanical properties of Ni 3 Co alloy

Uncovering the Influence Mechanism of Nonmetallic Atoms on the Mechanical Properties of Ni3Co Alloy

Molecular Dynamics and Experimental Investigation on the Interfacial Binding Mechanism in the Fe/Cu1−x-Nix Bimetallic Interface

The Strengthening Effects and Mechanisms of Alloying Elements on Interfaces for Multiphase Ni-based Superalloys: A First-Principles Study

First-Principles Study of Cu Addition on Mechanical Properties of Ni3Sn4-Based Intermetallic Compounds

First-Principles Study of Ni Additions on Mechanical Properties of Η'-Cu6sn5-Based Intermetallic Compounds

Effect of Different Concentrations of Co Doping on the Properties of Η′‐cu6sn5 and Ni3Sn4: First‐Principles Study

Microscopic mechanism of the effect of Nb and Cr co-doping on the strength and ductility of Ti2AlC/Ti3Al coherent interface

Reinforcing Al matrix composites by novel intermetallic/SiC interface and transition structure

Ab Initio Study of Energetics, Charge Transfer, and Atomic Structures of FCC Fe/NbC Interfaces with and Without N Doping: from Coherent to Semi-coherent Interfaces

Pinning Effect of Reactive Elements on Adhesion Energy and Adhesive Strength of Incoherent Al2O3/NiAl Interface.

Exploration of electrodeposited process of Ni-Co-Cr coating and investigation of Cr doping strengthening mechanism by indentation simulation

Density functional theory investigation on the stability, adhesion strength, tensile properties and fracture behavior of γ-Fe/Cu heterogeneous nucleation interface

Effects of dopants on the adhesion and electronic structure of a SnO2/Cu interface: a first-principles study