Abstract:It is well-accepted that thermoplastic vulcanizates (TPVs) integrate the fascinating recyclability of thermoplastics and the mechanical robustness comparable to nano-filled elastomers, deriving from the particular heterogeneous network structure. However, the elasticity of TPVs is inferior to covalently cross-linked elastomers, since the irreversible deformation or even collapse of plastic phases of TPVs will certainly give rise to considerable hysteresis loss and therefore deteriorate the elasticity. Herein, we proposed a facile network design strategy toward covalently cross-linked elastomer with mechanical robustness and recyclability by engineering heterogeneous blend networks into diene-rubber system. Specifically, two conventional diene-rubbers, ethylene propylene diene terpolymer (EPDM) and styrene-butadiene rubber (SBR), were adopted as thermodynamic incompatible pair and then directly admixed. Due to the significant difference in the cross-linking reactivity between the pair, the resulting system assembled into a microphase-separated structure with strong interfacial adhesion upon in situ co-cross-linking. Upon deformation, the overall chain orientation of the networks is promoted by the efficient interfacial stress transfer and a striking reinforcement of the networks is achieved accordingly. More importantly, by virtue of the slightly cross-linking attribute of EPDM component, the resulting system featured with desirable recyclability and high elasticity in comparison with conventional TPVs. We envisage that this work will provide important inspiration for the non-filling reinforcement of elastomers and the development of a new generation of thermoplastic vulcanizates with considerably low hysteresis through manipulating the covalent network heterogeneity.

Economical Preparation of Fluorine-Containing Thermoplastic Elastomer with Good Phase Miscibility and Elasticity Based on Dynamic Vulcanization

Advanced in Polysiloxane-Based Thermoplastic Dynamic Vulcanizate by Reactive Extrusion

Effects of Partial Replacement of Silicone Rubber with Flurorubber on Properties of Dynamically Cured Poly(vinylidene Fluoride)/silicone Rubber/flurorubber Ternary Blends

Preparation of FKM/EFEP thermoplastic vulcanizate with excellent heat and oil resistance, gas barrier property and recyclability

Selectively located aluminum hydroxide in rubber phase in a TPV: Towards to a halogen‐free flame retardant thermoplastic elastomer with ultrahigh flexibility

Novel heat and oil-resistant thermoplastic vulcanizates based on ethylene-vinyl acetate rubber/poly(vinylidene fluoride)

Effects of dynamic vulcanization on mechanical properties of polyolefin thermoplastic elastomer

Preparation and Properties of Dynamically Cured Poly(vinylidene Fluoride)/silicone Rubber Blends

Elastomeric polyolefin vitrimer: Dynamic imine bond cross-linked ethylene/propylene copolymer

Sustainable thermoplastic elastomers based on thermoplastic polyurethane and ground tire rubber

PP/EPDM-based Dynamically Vulcanized Thermoplastic Olefin with Zinc Dimethacrylate: Preparation, Rheology, Morphology, Crystallization and Mechanical Properties

Morphology And Mechanical Properties Of Ethylene-Vinyl Acetate Rubber/Polyamide Thermoplastic Elastomers

Reactive processing of ethylene-vinyl acetate rubber/polyamide blends via a dynamic transesterification reaction

Use of crosslinking agent to produce high‐performance PLA/EVA blends via reactive processing

Fluoride‐Catalyzed Siloxane Exchange as a Robust Dynamic Chemistry for High‐Performance Vitrimers

Skeletal Network Enabling New-Generation Thermoplastic Vulcanizates

Heterogeneous Network Design Strategy Toward Mechanically Robust and Recyclable Elastomers

Dynamically Vulcanized Ethylene Propylene Diene Terpolymer/nylon Thermoplastic Elastomers

Effect of Additives on the Morphology Evolution of EPDM/PP TPVs During Dynamic Vulcanization in a Twin-Screw Extruder

A Facile One-Pot Route to Elastomeric Vitrimers with Tunable Mechanical Performance and Superior Creep Resistance

Vulcanization of polypropylene