Abstract:For further efficiency improvement in kesterite-type Cu2ZnSn(S,Se)4 (CZTSSe) solar cells, it is essential to address the carrier recombination issue at the back electrode interface (BEI) caused by the undesirable built-in potential orientation toward an absorber as an n-MoSe2 interfacial layer formed. In this regard, back surface field (BSF) incorporation, i.e., field-effect passivation, shows promise for dealing with this issue due to its positive effect in decreasing recombination at the BEI. In this study, the BSF was realized with the p-type conduction transition in interfacial layer MoSe2 by incorporating Nb into the back electrode. The BSF width can be tuned via modulating the carrier concentration of the absorber, which has been demonstrated by capacitance–voltage characterization. A beyond 7% efficiency BSF-applied CZTSSe solar cell is prepared, and the effects of a tunable BSF and the mechanism underpinning device performance improvement have been investigated in detail. The wider BSF distribution in the absorber induces a decrease in reverse saturation current density (J0) due to the stronger BSF effect in suppressing BEI recombination. As a result, an accompanying increase in open-circuit voltage (VOC) and short-circuit current density (JSC) is achieved as compared to the BSF-free case. This study offers an alternative strategy to address the BEI recombination issue and also broadens the interface passivation research scope of potentially competitive kesterite solar cells.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10561?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10561</a>.EDS spectrum of a Mo:Nb film grown on the SLG substrate and statistical histograms of the absorber grain size distribution from the SEM images in <a class="internalNav" href="#fig5">Figure </a><a class="internalNav" href="#fig5">5</a>a,b; composition ratios in CZTS precursor solution; the compositions of MoSe2 and MoSe2:Nb films measured via EDS and XPS and those of CZTSSe films prepared on the SLG substrate measured by EDS (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10561/suppl_file/am0c10561_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Dual Optimization of Back Electrode Interface and Bulk Via the Synergistic Passivation Effect of Niobium Pentoxide Enables Efficient Kesterite Solar Cells

Modulation of Field-Effect Passivation at the Back Electrode Interface Enabling Efficient Kesterite-Type Cu 2 ZnSn(S,Se) 4 Thin-Film Solar Cells

In Situ Vanadium Modification Induced a Back Interfacial Field Passivation Effect toward Efficient Kesterite Solar Cells beyond 11% Efficiency

Effects of CuAlO2 on the heterojunction interface and performance of Cu2ZnSn(S,Se)4 thin-film solar cells

Synergistic effect of multifunctional MXene-nanosheet and naphthoquinone sulfonate toward high-performance perovskite solar cells and modules

24.11% High Performance Perovskite Solar Cells by Dual Interfacial Carrier Mobility Enhancement and Charge‐Carrier Transport Balance

Regulating Hetero‐Nucleation Enabling Over 14% Efficient Kesterite Solar Cells

Synergistical Transition Metal Ion Co-Doping and Multiple Functional Additive Passivation for Realizing 25.30% Efficiency Perovskite Solar Cells

The enhancement of CZTSSe solar cell performance through active construction of the double-layer absorber

Multinary alloying for facilitated cation exchange and suppressed defect formation in kesterite solar cells with above 14% certified efficiency

Role of zinc tin oxide passivation layer at back electrode interface in improving efficiency of Cu2ZnSn(S,Se)4 solar cells

Synergistic Dual-Layer Passivation Boosts Efficiency and Stability in Perovskite Solar Cells Using Naphthol Sulfonate

Enhanced Carrier Collection in Cd/In-Based Dual Buffers in Kesterite Thin-Film Solar Cells from Nanoparticle Inks

Elemental de-mixing-induced epitaxial kesterite/CdS interface enabling 13%-efficiency kesterite solar cells

In-doping collaboratively controlling back interface and bulk defects to achieve efficient flexible CZTSSe solar cells

Linked Nickel Oxide/Perovskite Interface Passivation for High‐Performance Textured Monolithic Tandem Solar Cells

Introducing Bi2S3 Interlayer to Synergistically Modify Mo Back Contact and Regulate Bulk Defects in Kesterite Solar Cells

Boosting Kesterite Solar Cell Performance with Tantalum Oxide Passivation Layer and In Situ Formed Point Contacts

Triple hole transporting and passivation layers for efficient NiOX-based wide-bandgap perovskite solar cells

Heterojunction interface regulation to realize high-performance flexible Kesterite solar cells