Abstract:Nanofibrous aerogels constructed by ceramic fiber components (CNFAs) feature lightweight, compressibility, and high-temperature resistance, which are superior to brittle ceramic aerogels assembled from nanoparticles. Up to now, in order to obtain CNFAs with stable framework and multifunctionality such as hydrophobicity and gas absorption, it is necessary to perform binding and surface modification processes, respectively. However, the microstructure as well as properties of CNFAs are deteriorated by the direct addition of binders and modifiers. To tackle these problems, we introduced a unique low-temperature (100 °C) chemical vapor deposition method (LTCVD) to achieve the cross-linking and hydrophobization of Si3N4 CNFA in only one step. More importantly, during the LTCVD process, SiOx coatings and nanowire arrays were in situ formed via vapor–solid (VS) and vapor–liquid–solid (VLS) mechanisms on the surface and intersection of Si3N4 nanofibers, which cemented the aerogel framework, endowed it with hydrophobicity, and improved its oxidation resistance at high temperature. Compared to most of its counterparts, the Si3N4/SiOx CNFA exhibited better mechanical properties, higher capability of oil/water separation (33–76 g·g–1), lower thermal conductivity (0.0157 W/m·K–1), and superior structural stability in a wide temperature range of −196–1200 °C. This work not only presents an excellent Si3N4/SiOx CNFA for the first time but also provides fresh insights for the exquisite preparation strategy of CNFAs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c05575?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c05575</a>.Synthesis process of the MTMS/VTES xerogel and Si3N4 nanofibers (Figure S1); fabrication of the Si3N4 CNFA via directional freeze casting (Figure S2); illustration of the low-temperature CVD process and experimental setup (Figure S3); description of the growth mechanism of SiOx coating and SNAs (Figure S4); mechanical characterizations of Si3N4/SiOx CNFA (Figure S5); morphology of Si3N4/SiOx CNFA in radial direction (Figure S6); calculation of the Poisson's ratio of Si3N4/SiOx CNFA (Figure S7); demonstration of oil/water separation process (Figure S8); illustration of the measurement setup of ablation at under butane flame (Figure S9); XRD patterns, TEM images, and EDS mappings of Si3N4/SiOx CNFA after 30 min isothermal oxidation (Figure S10); comparison of different Si3N4 insulation materials (Figure S11) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_001.pdf">PDF</a>)Axial compression and recovery processes of Si3N4/SiOx CNFA (movie S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_002.avi">AVI</a>)Radial compression and recovery processes of Si3N4/SiOx CNFA (movie S2) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_003.avi">AVI</a>)Demonstration of the compression and recovery processes using a 500 g weight (movie S3) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_004.avi">AVI</a>)Low-temperature hyperelasticity in liquid nitrogen (movie S4) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_005.avi">AVI</a>)High-temperature hyperelasticity in the flame of a butane blowtorch (movie S5) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_006.avi">AVI</a>)Demonstration of the hydrophobicity of Si3N4/SiOx CNFA (movie S6) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_007.avi">AVI</a>)Absorption process of dichloromethane (movie S7) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_008.avi">AVI</a>)Recycle process of Si3N4/SiOx CNFA by squeezing (movie S8) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_009.avi">AVI</a>)Repetitive absorption process of dichloromethane after squeezing (movie S9) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c05575/suppl_file/am1c05575_si_010.avi">AVI</a>)This article has not yet been cited by other publications.

Reaction-Spun Transparent Silica Aerogel Fibers

Gradient All-Nanostructured Aerogel Fibers for Enhanced Thermal Insulation and Mechanical Properties

Silica Aerogels with Self-Reinforced Microstructure for Bioinspired Hydrogels

Preparation of Silica Aerogels Via Non-supercritical Drying and Their Formation Process

Aerogel Fibers Made via Generic Sol‐Gel Centrifugal Spinning Strategy Enable Dynamic Removal of Volatile Organic Compounds From High‐Flux Gas

Synthesis and Characterization of Silica Aerogel and Its Composite Materials

In situ crosslinking of silica aerogel with reactive carbon fiber for high mechanical property, thermal insulation and superhydrophobicity

Redox Responsive Sol–Gel Transition: A New Concept for Continuous Spinning of High-Performance and Recyclable Aerogel Fibers

Si 3 N 4 Nanofibrous Aerogel with In Situ Growth of SiO x Coating and Nanowires for Oil/Water Separation and Thermal Insulation

Polyimide Aerogel Fibers with Superior Flame Resistance, Strength, Hydrophobicity, and Flexibility Made via a Universal Sol-Gel Confined Transition Strategy.

Transparent, robust, and machinable hybrid silica aerogel with a “rigid-flexible” combined structure for thermal insulation, oil/water separation, and self-cleaning

Toward Improved Optical Transparency of Silica Nanofibrous Aerogels

Facilitated Fabrication of High Strength Silica Aerogels Using Cellulose Nanofibrils As Scaffold.

Inclusion of Hydrophobic Liquids in Silica Aerogel Microparticles in an Aqueous Process: Microencapsulation and Extra Pore Creation

Synergistic strategy of hard-template etching and soft-template protection for rapid fabrication of aerogel short fibers

Facile fabrication of compressive aerogels with novel core/shell fibrous skeleton for oil sorption and thermal evaporation

Facile Synthesis of Flexible and Hydrophobic Polymethylsilsesquioxane Based Silica Aerogel Via the Co-Precursor Method and Ambient Pressure Drying Technique

An economic and environmentally benign approach for the preparation of monolithic silica aerogels

Flexible and Compressible Nanostructure-Assembled Aramid Nanofiber/Silica Composites Aerogel

Preparation, mechanical, acoustic and thermal properties of silica composite aerogel using wet-laid glass fiber felt as scaffold

Monolithic chitosan-silica composite aerogel with comprehensive performances prepared by SBG-FD method