Abstract:Carbide-free bainitic (CFB) steels with a matrix of bainitic ferrite and thin layers of retained austenite, to reduce the manufacturing costs, usually do not contain alloying elements. However, a few reports were presented regarding the effect of alloying elements on the properties of these steels. Thus, this study evaluates the effects of vanadium and rare earth (Ce-La) microalloying elements on the structure, phase transformation kinetics, and mechanical properties of carbide-free bainite steel containing silicon fabricated by the casting and austempering procedure. Optical and scanning electron microscopy (OM and SEM), electron backscatter diffraction (EBSD), and X-ray diffraction (XRD) were used to study the microstructure and phase structure. The transformation kinetics were examined by a dilatometry test. Hardness, tensile, and impact tests evaluated the mechanical properties. Due to adding alloying elements, the fracture toughness and change in matrix phases relation was studied by the crack tip opening displacement (CTOD) test and SEM fractography. The microstructure of the silicon added sample was completely carbide-free bainite. The test results showed vanadium helped CFB formation, even in continuous cooling. The primary austenite grain (PAG) size grew by vanadium addition. The EBSD phase map illustrates an increment in the percentage of retained austenite by vanadium. In contrast, the addition of 0.03 wt% rare earth reduced the primary austenite grain size and reduced the retained austenite content. The results of the dilatometry test confirmed that vanadium and rare earth addition both reduced the critical cooling rate of the bainite transformation. Vanadium leads to an earlier cessation of bainite transformation, while rare earth elements postpone this transformation. Mechanical tests showed that the tensile strength of carbide-free bainite steels was strongly influenced by the morphology and volume fraction of austenite. Retained austenite, when transformed to martensite during the transformation-induced plasticity (TRIP) phenomenon, leads to increased tensile strength and fracture toughness, or retained austenite with a film-like shape prevents the growth of cracks by blinding the crack tip. The result of the CTOD test exhibited that retained austenite plays the leading role in increasing crack resistance when TRIP occurs.

Carbide and Matrix Microstructure Evolution of High-Vanadium Wear-Resistance Cast Iron with High-Silicon Content During Austempering

Influence of Tungsten on Microstructure and Properties of As-Cast Hi-Cr Cast Iron

Effect of quenching temperature on microstructure and properties of multivariate high chromium cast iron

Wear Behavior and Microstructure Changes of a High Chromium Cast Iron: The Combined Effect of Heat Treatment and Alloying Elements

Microstructure and Mechanical Properties of High Boron White Cast Iron with about 4 Wt% Chromium

Microstructure and mechanical properties of high boron white cast iron

Characterization of Microstructure and Mechanical Properties of High Chromium Cast Irons Using Sem and Nanoindentation

Improvement in microstructure and wear-resistance of high chromium cast iron/medium carbon steel bimetal with high vanadium

Microstructure and abrasive wear properties of high-vanadium-chromium wear resistant alloy

Tempering temperature dependence on the microstructure, mechanical properties and wear behaviour of a novel high chromium cast iron

Microstructure of a novel Ni-Cr-W-Mo-V containing ductile iron and decomposition behavior of its eutectic carbides at elevated temperature

Effect of Vanadium and Rare Earth on the Structure, Phase Transformation Kinetics and Mechanical Properties of Carbide-Free Bainitic Steel Containing Silicon

Microscopic Study of Carbide Precipitation during Heat Treatment of 35Cr–4C High Chromium Cast Iron

Effect of Austempering Temperature on Microstructure Evolution, Mechanical Properties and Wear Resistance of Carbon-free Nano-bainite Steel

Preparation and wear properties of high-silicon high-vanadium wear-resistant alloy with nano pearlite matrix and carbides composite structure

Microstructures and Mechanical Properties of Austempered Fe-C-Si-B Alloy

Effect of Silicon and Vanadium on the Composition of Carbide Phase in Mottled Medium-Alloy Chromium-Nickel Cast Iron

Formation and Effect of "Woven-carbides" in Surface Layer of Indefinite Chill Cast-iron Roller

Investigation of microstructure evolution and mechanical properties of near-eutectic Fe2-CoNiCr C high entropy cast iron

Fabrication and microstructure of in situ vanadium carbide ceramic particulates-reinforced iron matrix composites

Simulating Anisotropic Thermal Conduction in Supernova Remnants I : Numerics and the Evolution of Remnants