Abstract:The influence of chromium, manganese, carbon content and quenching modes on the formation of the structure, metastability of austenite and properties wear-resistant cast iron alloying system Fe-Cr-Mn-C with small additions of titanium, copper, silicon in various variations was investigated. The metallographic, durometric research methods, tests for dynamic bending, impact-abrasive wear resistance were applied. The regularities of changes in the phase composition and microstructure under the influence of the heating temperature for quenching in the range from 920 to 1070 °C with cooling in sand have been established. With an increase in the heating temperature for quenching in the structure of cast irons, the content of austenite increases and the content of quenching martensite decreases. The amount of carbide phases of compositions (Fe, Cr)3C, (Cr, Fe)7C3, (Cr, Fe)23C6 and titanium carbonitrides TiCN, depending on the content of carbon and alloying elements, as well as the heating temperature for quenching, varies within 20...35 %. A significant contribution of deformation induced phase transformations - martensitic, dynamic aging, occurring in the surface layers in the process of testing in the formation of impact-abrasive wear resistance of cast irons was revealed. It is characterized by the effects of deformation self-hardening, manifested in the increase in the hardness of the surface (working) layer within HRC = 2...9 and relaxation of microstresses. The formation of optimal martensitic-austenitic-carbide metastable structure could be provided at the optimal ratio of alloying elements and under the influence of heat treatment at which the effect of deformation self-hardening at wear that increases drastically the wear resistance of the investigated cast irons could be realized. The developed cast irons of optimal compositions have shown high economic efficiency in the production of working bodies of shot-blast machines, sand-throwers, protective lining plates of sintering-blast furnace equipment. They can be recommended for the manufacture of various high-wear machine parts of machines operating under conditions of impact-abrasive andabrasive wear.

Formation and Effect of "Woven-carbides" in Surface Layer of Indefinite Chill Cast-iron Roller

Tempering temperature dependence on the microstructure, mechanical properties and wear behaviour of a novel high chromium cast iron

Influence of Compositions and Heat Treatment on Metastability of Structure and Properties of Wear-Resistant Cast Irons of the Fe-Cr-Mn-C System

Effect of (nbti)c Particles on the Microstructure and Hardness of High Chromium and Nickel Indefinite Chilled Cast Iron

Wear Property of Low-Temperature Bainite in the Surface Layer of a Carburized Low Carbon Steel

Microscopic Study of Carbide Precipitation during Heat Treatment of 35Cr–4C High Chromium Cast Iron

The Effect of Tempering Temperature on Microstructure and Wear Behavior of Tungsten and Boron Alloyed Ni-Hard 4 White Cast Irons

Wear Behavior and Microstructure Changes of a High Chromium Cast Iron: The Combined Effect of Heat Treatment and Alloying Elements

Tailoring Carbon Distribution in Α/γ Phase of Ductile Iron and Its Effects on Thermal Conductivity

Microstructure and Fracture Toughness of a WC-Fe Cemented Carbide Layer Produced by a Diffusion-Controlled Reaction

Effect of Tempering Temperature on Microstructure and Mechanical Properties of Nanostructured Bainitic Steel

Precipitation Behavior of the Lower Bainitic Carbide in a Medium-Carbon Steel Containing Si, Mn and Mo

Insight into the impact of microstructure on crack initiation/propagation behavior in carbide-free bainitic steel during tensile deformation

Characterization of Microstructure and Mechanical Properties of High Chromium Cast Irons Using Sem and Nanoindentation

Effect of microstructure on wear and rolling contact fatigue behaviors of bainitic/martensitic rail steels

Effect of Tempering on the Microstructure and Mechanical Properties of A Medium Carbon Bainitic Steel

Fatigue and recrystallization evolution of carbide-free bainitic layer under high-stress rolling sliding contact

Effect of Fluctuation, Modification and Surface Chill on Structure of 20%cr Hypereutectic White Cast Iron

Improvement to the Morphology of Carbides in Low Alloy White Cast Iron

Effect of tempering temperature on microstructure and properties of low silicon hypereutectic high chromium cast ironAuswirkung der Anlasstemperatur auf das Gefüge und die Eigenschaften von übereutektischem Gusseisen mit niedrigem Siliziumgehalt und hohem Chromgehalt

WC-Fe Layer with High Volume Fraction and Fracture Toughness on Cast Iron Fabricated by in Situ Solid-Phase Diffusion