Abstract:The strong anisotropy, asymmetry and distorted evolution of plasticity in thermomechanical processing of high performance metallic materials such as α-Ti make it difficult to identify the deformation mechanisms. In this research, a general characterization framework was established to determine the anisotropic and asymmetrical deformation behavior of α-Ti under different thermomechanical loading conditions. The temperature dependent discontinuous constitutive framework was developed for modeling of the distorted evolution of plasticity. The link between crystal plasticity simulation and continuum modeling considering the evolving yield surface of materials with temperature was then established. By taking the thermomechanical working of thin-walled α-Ti tube as a study case, the high temperature digital image correlation (HT-DIC) measurement approach, and the electron backscattered diffraction (EBSD) based physical measurement of arc and small-column samples were proposed to obtain the fundamental tension/compression properties and texture evolution of the alloy at different working temperatures. A viscoplastic self-consistent (VPSC) crystal plasticity based numerical simulation was conducted to determine the temperature dependent anisotropy and asymmetry in plastic deformation. A multi-objective optimization method was used to calibrate the VPSC model parameters and an interpolation approach was employed to smoothly identify the nonlinear evolution of yield loci with strain and temperature. By considering five main deformation mechanisms, viz., prismatic slip, basal slip, pyramidal <c+a> slip, {10–12}<10-1-1> tension twinning and {11–22}<11-2-3> compression twinning, the interactive relationships among flow stress, R-value, yield locus, deformation mechanism, texture evolution and working temperature were established and elaborated. The major findings include: 1) α-Ti tube behaves a significant anisotropy and asymmetry in terms of flow stress, R-value, yield locus, and deformed texture at room temperature, but the anisotropy and asymmetry are significantly reduced at elevated temperatures due to the decrease of twinning activity; 2) The temperature dependency of twinning activity in α-Ti depends on the decrease of the critical resolved shear stress (CRSS) value of pyramidal <c+a> slip with temperature; 3) For the materials with the c-axes of grains towards to normal direction (ND), the increasing activities of pyramidal <c+a> slip, tension twinning and compression twinning decrease the R-value; 4) The activation of twinning generates significant anisotropy and asymmetry and leads to an irregular evolution of yield loci. The developed theoretical framework of characterization and modeling is efficient for producing the above findings and provides a basis for generating a whole spectrum of knowledge of the anisotropy and asymmetry in plastic deformation of the high performance materials that are generally difficult to characterize.

Dynamic Yielding and Plastic Flow Behavior of Ti-6al-4v under Complex Loading

The yielding and plastic flow behavior of TC17 alloy under tension/compression-torsion loading at high strain rates

Dynamic Response of Conventional and Hot Isostatically Pressed Ti–6Al–4V Alloys: Experiments and Modeling

Investigation on Plastic Flow Behaviors of FCC Polycrystalline Aluminum under Pre-Cyclic Tension-Compression Loading: Experiments and Crystal Plasticity Modeling.

Biaxial Tensile Behavior of Ti-6Al-4V under Proportional Loadings at High Strain Rates

Plastic Behavior and Failure Mechanism of Ti-6Al-4V under Quasi-Static and Dynamic Shear Loading

Influence of Stress Triaxiality on the Failure Behavior of Ti-6Al-4V Alloy under a Broad Range of Strain Rates

High strain rate mechanical behavior of Ti-6Al-4V with micro–macro correlation under compressive loading

Investigation into the Dynamic Mechanical Properties of Selective Laser Melted Ti-6Al-4V Alloy at High Strain Rate Tensile Loading

The Role of Microstructure and Stress State in Dynamic Mechanical Behavior of Ti-5Al-5V-5Mo-3Cr Alloy

Strain Rate- and Temperature-Dependent Mechanical Properties of Ti-6Al-4V in Dynamic Compression: Hardening and Softening Behaviour Analysis Using Strain Energy-Based Method

Dynamic compressive properties and underlying failure mechanisms of selective laser melted Ti-6Al-4V alloy under high temperature and strain rate conditions

An Investigation of Dynamic Mechanical Behaviour of Ti6al4v Titanium Alloy at Room Temperature

Plastic Behavior and Improved Constitutive Model of a Laser-Solid-formed Alloy under the Synergistic Effects of Temperature, Strain Rate, and Stress State

Hot Tensile Deformation Mechanism and Dynamic Softening Behavior of Ti–6Al–4V Alloy with Thick Lamellar Microstructures

Microstructure Evolution and Dynamic Mechanical Properties of Laser Additive Manufacturing Ti-6Al-4V under High Strain Rate

Temperature dependent evolution of anisotropy and asymmetry of α-Ti in thermomechanical working: Characterization and modeling

Dynamic stress–strain properties of Ti–Al–V titanium alloys with various element contents

Superior Strain Rate Strengthening Effect and Ductility of a Ti-4.5Al-2.9V-3Fe Alloy under High Strain Rate Loading

The Mechanical Behaviours of the Ti-10V-2Fe-3Al Alloy under the High-Temperature and Dynamic Loading Conditions

Plastic Flow Modeling of Ti-5Al-2Sn-2Zr-4Mo-4Cr Alloy at Elevated Temperatures and High Strain Rates