Passivation of Hot-Rolled Rebars

Xinying Lu

DOI: https://doi.org/10.1007/978-981-19-8102-9_5

2023-01-01

Abstract:The pseudo-passivation of black rebar with mill scale in simulated concrete pore solutions is presented. It is revealed that the pseudo-passivation of hot-rolled rebar is the inward gradual oxidation of mill scale from the surface to inside.

What problem does this paper attempt to address?

Passivation and Corrosion of Rebar with Mill Scale (Ⅲ): Pseudo Passivation

Lu Xinying

DOI: https://doi.org/10.3969/j.issn.1006-2890.2022.08.005

2023-01-01

Abstract:The passivation behavior of the black rebar without mill scale is briefly introduced. The passive film on the descaled rebar generated by anodic polarization is mainly composed of γ-Fe2O3 and Fe3O4, and the one produced by natural immersion is mainly Fe3O4 or Fe3O4 plus some γ-Fe2O3 mixed in the outer layer.
Passivation and Corrosion of Black Rebar with Mill Scale

Xinying Lu

DOI: https://doi.org/10.1007/978-981-19-8102-9

2023-01-01

Abstract:This book discusses the pseudo-passivation behavior and corrosion mechanisms of hot-rolled rebars with mill scale and provides protection measures
Corrosion of Hot-Rolled Rebars

Xinying Lu

DOI: https://doi.org/10.1007/978-981-19-8102-9_7

2023-01-01

Abstract:The corrosion mechanisms of rebar with mill scale are discussed in this chapter. The hot-rolled rebars with rust stains are ready to corrode when there is water or aggressive ions, and the rusty rebars are difficult to be re-passivated in concrete. The galvanic corrosion is considered to be the induction of corrosion of the black rebars with mill scale. The main charge carriers are analyzed to be the interstitial metallic ions, not the oxygen vacancies. A unified explanatory model for the passivation and corrosion of rebar is given according to the observations.
The Electrochemical Characterization of Rebar Passivation Film in Simulated Concrete Media

Gan Weizhong,Jin Weiliang,Shao Jianping

DOI: https://doi.org/10.4028/www.scientific.net/amr.255-260.539

2011-01-01

Advanced Materials Research

Abstract:Based on the fundamental theory of electrochemical anodic polarization, simulated concrete is doped with corrosion inhibitor to prevent corrosion by chloride ion in the marine environment. Thus, with reference to the potential-time curves obtained in different concrete environments and construction conditions, the early dynamic state of active transition of rebar passive films in concretes can be quickly characterized. According to the experiments, the characteristics of passive active transition are synchronous with rebar corrosion. This helps to systematically study the influence of different components of concrete and external media on the durability of the concrete structure. The strong alkaline environment of the concrete is useful in controlling corrosion rate of reinforcing bar. As one of the additional protective measures of the durability of the concrete structure, corrosion inhibitor's long-term performance contains uncertainty.
Passivation and Depassivation of HPB335 Carbon Steel in Simulated Concrete Pore Solution

Haodong Ji,Ye Tian,Ruoyi Zhao,Nanguo Jin,Xianyu Jin,Zushi Tian,Dongming Yan,Hailong Ye

DOI: https://doi.org/10.20964/2020.07.43

IF: 1.541

2020-01-01

International Journal of Electrochemical Science

Abstract:In order to study the corrosion mechanism of carbon steel, the passive film characteristics, critical chloride threshold and depassivation of HPB335 carbon steel in different solutions were studied. This study mainly used Mott-Schottky analysis, open-circuit potential, linear polarization resistance and point defect model (PDM) to study the passive film characteristics and depassivation mechanism of carbon steel. The experimental results show that the passive film quality and aggressive ions threshold of carbon steel in highly alkaline solutions are mainly related to pH. In the characteristics of the passive film, the correlation between the resistance and the chloride threshold is relatively large. In addition, PDM was used to study the depassivation mechanism of carbon steel. This study demonstrates the effectiveness of PDM for passivation and depassivation of carbon steel in highly alkaline solutions.
RESEARCH ON PASSIVATION BEHAVIOR OF REBAR WITH MILL SCALE AND STAINS IN STRONG ALKALI

Xinying Lu,Wei Lin,Yuanjin Li

DOI: https://doi.org/10.13204/j.gyjz201510023

2015-01-01

Abstract:The polarization behavior of rebar with mill scale and stains was investigated in simulated solutions with and without chlorions.The results showed that the hot-rolled rebar without and with stains could be passivated in strong alkali solutions without chloride, but the latter usually needs higher passive current density.Dense mill scale had some protective function when pH=10~12.5, but became unstable when pH≥13.5.The rebar with dense mill scale and without stains also could be passivated in strong alkali solutions with some chlorides, but the rusted one kept being in active corrosion state.
Protection of Hot-Rolled Rebars

Xinying Lu

DOI: https://doi.org/10.1007/978-981-19-8102-9_8

2023-01-01

Abstract:The principles and measures for protection of hot-rolled rebars are briefly introduced. The high-temperature rapid phosphating to improve the atmospheric corrosion resistance and the cathodic prevention using sacrificial anodes for rebars subject to chlorides are recommended. It should be careful to apply the electro-chemical desalination or re-alkalization to the actual rebars with mill scale, and it is suggested to use the ultra-high performance concrete as a repair material to protect the deteriorated normal concrete structures.
Distribution of millscale on corroded steel bars and penetration of steel corrosion products in concrete

Yuxi Zhao,Yingyao Wu,Weiliang Jin

DOI: https://doi.org/10.1016/j.corsci.2012.09.014

IF: 7.72

2013-01-01

Corrosion Science

Abstract:This study investigated a reinforced concrete specimen that had deteriorated in an artificial environment for 2. years. The steel/concrete interface and corrosion-induced cracks were observed by SEM to investigate the millscale on the rebar surface and the distribution of rust. The millscale was not further oxidised before the surface cracking of the concrete cover. The penetration of corrosion products into concrete and the formation of a corrosion layer proceeded simultaneously. The rust did not fill the corrosion-induced cracks in concrete. Instead of the three-stage model, a two-stage model is proposed to describe the concrete cracking process induced by steel corrosion. © 2012 Elsevier Ltd.
Mill Scale and Corrosion Layer at Concrete Surface Cracking

Yuxi Zhao,Weiliang Jin

DOI: https://doi.org/10.1016/b978-0-12-809197-5.00005-0

2016-01-01

Abstract:Electrochemically corroded reinforced concrete specimens are observed by a digital microscope and a scanning electron microscope to study the critical thickness of the corrosion layer at concrete inner and outer surface cracking; the rust distributed at the steel–concrete interface and in corrosion-induced cracks are also investigated. This study found that a uniform mill scale layer exists on the surface of the corroded steel bar and that rust does not fill the corrosion-induced cracks before concrete surface cracking in the electrochemically corroded reinforced concrete specimens.
Mill Scale of Hot-Rolled Rebars

Xinying Lu

DOI: https://doi.org/10.1007/978-981-19-8102-9_4

2023-01-01

Abstract:The formation, composition, and microstructure of mill scale are briefly introduced. The mill scale formed at a relatively higher temperature with a rapid cooling is usually composed of FeO, Fe3O4, and Fe2O3 from inside to outside, forming a trilayer structure. Nowadays it is mainly composed of Fe3O4 obtained by the controlled rolling and cooling process for high strength rebars.
Passivation performance of Nb microalloyed rebar in concrete carbonation environments with different pH

Zeyun Zeng,Shangjun Gu,Jie Wang,Fulong Wei,Xiang Xie,Zhiying Li,Hui Yang,Changrong Li

DOI: https://doi.org/10.1038/s41598-024-74763-0

IF: 4.6

2024-10-03

Scientific Reports

Abstract:In this study, XPS sputtering depth, SEM and electrochemical tests (CV, EIS, M-S, i-t, DPP) were used to study the structural composition and formation mechanism of surface passive film of Nb microalloyed rebar in SCPS with different pH. The results showed that after passivation for 10 d in SCPS with different pH, compared with CS rebar, the stability and compactness of surface passive film of 34Nb rebar gradually increased with the decreases of pH. Firstly, with the decreases of pH, the outer layer of surface passive film of 34Nb rebar was composed of Fe oxides and Fe hydroxides, and the inner layer was composed of Fe oxides and Nb oxides, thus increasing the mass ratio of Fe 3+ /Fe 2+ and Nb 2 O 5 /(NbO 2 + NbO). Secondly, with the decreases of pH, the addition of Nb promoted the formation of Fe oxides in 34Nb rebar, obtaining the excellent R ct , E corr and E p . Finally, with the decreases of pH, the addition of Nb promoted the enrichment of Nb oxides in 34Nb rebar, inhibiting the degradation of Fe oxides, and the passive film exhibited the P-N type semiconductor, thus significantly decreasing the carrier density and enhancing the passivation rate of 34Nb rebar.

multidisciplinary sciences
Chemical Composition of Corrosion Products of Rebar Caused by Carbonation and Chloride

Jundi Geng,Junzhe Liu,Jiali Yan,Mingfang Ba,Zhimin He,Yushun Li

DOI: https://doi.org/10.1155/2018/7479383

2018-06-19

International Journal of Corrosion

Abstract:The microstructures of steel bars were studied by X-ray photoelectron spectroscopy (XPS), and the mechanism of corrosion of steel bars under the corrosion factors was elucidated. The results show that the passivation film and corrosive surface of the steel surface in the solution of the chloride-containing salt were coarser and the surface state was denser. The main corrosion products are FeOOH and FeO. The surface of the steel immersed in the simulated carbonized solution had loose pores. The main components are FeOOH, Fe 3 O 4 , and Fe 2 O 3 . The surface of the steel bar has a large amount of yellowish brown corrosion products in the simulated carbonization and chloride salt. The surface of the corrosion products was stripped and the main components are FeOOH, Fe 3 O 4 , and FeCl 3 , where the content of FeOOH is as high as 60%. The peak value of iron is gradually increased from the simulated chloride salt solution to the carbonized solution to the combined effect of carbonation and chloride salt; the iron oxide content is increased and corrosion of steel is obviously serious.
Experimental study on passivation and corrosion performances of pre-rusted steel in simulated concrete pore solution

Kaiqiang Li,Yunze Xu,Xiaona Wang,Kangchen Wang,Shenyou Song,Wenliang Jin,Yi Huang

DOI: https://doi.org/10.1080/1478422X.2021.2019881

2021-12-29

Abstract:The influences of the rust layer on the passivation and corrosion of Q235b carbon steel in simulated concrete pore solution were studied. The differences between the inner and outer rust layer were characterized. Results show that the pre-rusted samples could still reach passive state at high pH condition free of chloride ions. However, the quality of the passive film formed on the pre-rusted steel were dramatically lower than that formed on the fine polished steel. The pitting corrosion resistance of the pre-rusted steel was significantly higher than that of the fine polished steel in the chloride-containing pore solution. The pitting corrosion potential would be further promoted after the elimination of the outer rust layer. The reaction between the hydrogen ions and the rust layer could inhibit the pitting initiation. Furthermore, the consumption of the corrosive agents induced by the rust layer could further retard the area expansion of the pits.
Enhanced passivation of galvanized steel bars in nano-silica modified cement mortars

Haibing Zheng,Jian-Guo Dai,Lei Hou,Guozhe Meng,Chi Sun Poon,Weihua Li

DOI: https://doi.org/10.1016/j.cemconcomp.2020.103626

IF: 9.93

2020-08-01

Cement and Concrete Composites

Abstract:<p>This work investigated the electrochemical behavior of galvanized steel bars in nano-silica modified cement mortars. The internal environmental factors of the mortar were firstly characterized. Then the passivation process of the galvanized steel bars was monitored. The results showed that presence of nano-silica influenced the passivation process of the galvanized steel bars and improved the protective properties of the passive film. The morphology of passive film was changed, and the thickness was increased by the addition of nano-silica. The CHZ layer performed as a bonding agent between the galvanized steel and the mortar matrix. The addition of nano-silica promoted the formation of gaps at the rebar/mortar interface, and there was no evidence for the presence of a lime-rich layer at the interface.</p>

construction & building technology,materials science, composites
Effects of varying pH on the passive film formation in high-strength anti-seismic rebar

Hongfeng Shi,Shangjun Gu,Jie Wang,Fulong Wei,Xiang Xie,Zeyun Zeng,Tiangyou Wang,Yafei Jiang,Zhiying Li,Changrong Li

DOI: https://doi.org/10.1080/00084433.2024.2413286

2024-10-12

Canadian Metallurgical Quarterly

Abstract:In this paper, electrochemical measurements (CV, PDP, M-S and EIS) and surface characterisation techniques (SEM, EDS, AFM, TEM and XPS) were used to study the passivation phenomenon in high-strength anti-seismic rebar under varying pH conditions. The results show that a passive film with a polycrystalline structure with a certain roughness is formed on the surface of the rebar. The passive film is mainly composed of Fe oxides and hydroxides, and there are also oxides of Nb, Mn, Si and Cr. The existence of these oxides builds a dense and stable passive film. The passive film is basically stable at 7d, but the early growth of the passive film at higher alkalinity show instability. After 10 days of passivation, with the decrease of pH, the passive film gradually densifies, the pitting potential increased by about 0.03–0.14 V, the carrier density decreased by 30% on average, the phase angle increased slightly, and the ratios of Fe 2+ /Fe 3+ and O 2− /OH − increased, resulting in a passive film thickness of 6.2 nm. Dans cet article, on a utilisé des mesures électrochimiques (CV, PDP, M-S et EIS) et des techniques de caractérisation de la surface (MEB, EDS, AFM, TEM et XPS) pour étudier le phénomène de passivation dans les barres d'armature antisismiques à haute résistance sous diverses conditions de pH. Les résultats montrent qu'un film de passivation à structure polycristalline d'une certaine rugosité se forme à la surface des barres d'armatures. Le film de passivation est composé principalement d'oxydes et d'hydroxydes de Fe ainsi que d'oxydes de Nb, Mn, Si et Cr. L'existence de ces oxydes élabore un film de passivation dense et stable. Le film de passivation est fondamentalement stable à 7 jours, mais la croissance précoce du film de passivation à une alcalinité plus élevée montre une instabilité. Après 10 jours de passivation, avec la diminution du pH, le film de passivation se densifie graduellement, le potentiel de piqûration a augmenté d'environ 0.03–0.14 V, la densité du porteur a diminué de 30% en moyenne, l'angle de phase a augmenté légèrement et les rapports de Fe 2+ /Fe 3+ et O 2− /OH − ont augmenté, produisant une épaisseur du film de passivation de 6.2 nm.

metallurgy & metallurgical engineering
Semiconducting Behaviour and Corrosion Resistance of Passive Film on Corrosion-Resistant Steel Rebars

Shanglin Lv,Kefei Li

DOI: https://doi.org/10.3390/ma15217644

IF: 3.4

2022-11-01

Materials

Abstract:Chloride-induced corrosion of steel rebars is one of the major causes of the premature failures of reinforced concrete structures served in different environments. This paper investigates the semiconducting behaviour and corrosion resistance of the passive film formed on the corrosion-resistant rebars exposed to simulated concrete pore solutions with different pH values and chloride concentrations. The electronic properties of the passive film were studied using potentiodynamic measurements and capacitance measurements (Mott–Schottky analysis). The results indicate that, firstly, the passive film of corrosion-resistant steel rebar shows n-type semiconducting behaviour with shallow and deep donor states in the band gap during passivation, and the deep donor energy level of corrosion-resistant steel rebar passive film is not sensitive to the decreasing pH value; secondly, under the same conditions, the passive film of corrosion-resistant rebars has a larger negative flat-band potential and thicker space charge layer than hot-ribbed rebars; thirdly, n-type semi-conductivity at a higher potential disappears once the chloride concentration at the rebar surface attains the chloride threshold value; and finally, a reverse charge layer forms on the surface of CR rebar at 0.50 V potential.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
A Self-Balanced Electrochemical Model for Corrosion of Reinforcing Steel Bar in Considering the Micro-Environments in Concrete

Guoyi Zhang,Ye Tian,Xianyu Jin,Qiang Zeng,Nanguo Jin,Dongming Yan,Zushi Tian

DOI: https://doi.org/10.1016/j.conbuildmat.2020.119116

IF: 7.4

2020-01-01

Construction and Building Materials

Abstract:Based on the electrochemical mechanism of steel corrosion, an improved electrochemical model was established to numerically simulate the corrosion of reinforcement in concrete under marine environment. The corrosion potential distribution and current density of corroded reinforcement were deduced from the corresponding micro-environments on the surface of steel bar, including oxygen, chloride ions, temperature and relative humidity. The equilibrium of gaseous oxygen and dissolved oxygen in pore solution was considered in the model. And the diffusion of invasion mediums in cement matrix and interfacial transition zone (ITZ) were also taken into account. The anode and cathode areas on the surface of steel bar was determined by the time-varying distribution of chloride ions rather than a fixed ratio to achieve the self-balance between macrocell and microcell corrosion. The simulation results agree well with the experimental data. The numerical analysis indicates that the growth of environmental chloride ions concentration will enhance the non-uniformity of chloride ions distribution, but does not contribute much to the increase of maximum rust layer thickness on steel surface. In the propagation stage of corrosion, oxygen concentration is a key factor in controlling corrosion reactions compared to chloride ions. Moreover, environment temperature has a positive effect on both the range of active areas on surface of steel rebar and rust layer thickness.
Macrocell Corrosion Behavior of Steel Bar with Different Connection

Wei-zhong GAN,Wei-liang JIN,Tian-ning XU

DOI: https://doi.org/10.3969/j.issn.1007-9629.2009.06.015

2009-01-01

Abstract:With simulated concrete pore solutions and various steel bars with different connection combina-tions,many electrochemical processes of steel bars inside concrete structures including passivation,activa-tion and corrosion was demonstrated.The effects of different steel bars and their various methods of con-nection on macrocell corrosion were analyzed,and the advantages and disadvantages of connection methods of steel bar were evaluated in terms of concrete structure durability.It is shown by experiment that identi-cal steel bars(in the same chemical components)should be used in electrical connection reinforcement cage,preferably HRB400 steel bar manufactured by one particular factory currently.However,when different types of steel bars are required due to any constraint,insulation connecting technology should be used.
Effect of Nb contents on the passivation behavior of high-strength anti-seismic rebar in concrete environments

Zeyun Zeng,Shangjun Gu,Jie Wang,Fulong Wei,Xiang Xie,Zhiying Li,Hui Yang,Changrong Li

DOI: https://doi.org/10.1038/s41529-024-00543-w

2024-11-29

npj Materials Degradation

Abstract:In this study, the surface analysis, cross-section analysis and electrochemical analysis were used to explore the formation mechanism of Nb contents on the passive film of high-strength anti-seismic rebar in simulated concrete pore solution. The passivation experiments confirmed that the addition of Nb promoted the stability and compactness of surface passive film of Nb-containing rebar, and the passivation efficiency of Nb-containing rebar was stronger than that of CS rebar. Firstly, with the decreases of pH, the increases of Nb promoted that the outer layer of the passive film were mainly composed of Fe oxides and Fe oxyhydroxides, the inner layer were mainly composed of Fe oxides and Nb oxides. Secondly, the increases of Nb were beneficial to the formation of Nb oxides, which enhanced the passivation rate of the passive film and inhibited the degradation of Fe oxides, thus enhancing the thickness of surface passive film of Nb-containing rebar.

materials science, multidisciplinary
Pitting Corrosion Behaviour of New Corrosion-Resistant Reinforcement Bars in Chloride-Containing Concrete Pore Solution

Jin-yang Jiang,Yao Liu,Hong-yan Chu,Danqian Wang,Han Ma,Wei Sun

DOI: https://doi.org/10.3390/ma10080903

IF: 3.4

2017-08-04

Materials

Abstract:In this study, the pitting behaviour of a new corrosion-resistant alloy steel (CR) is compared to that of low-carbon steel (LC) in a simulated concrete pore solution with a chloride concentration of 5 mol/L. The electrochemical behaviour of the bars was characterised using linear polarisation resistance (LPR) and electrochemical impedance spectroscopy (EIS). The pitting profiles were detected by reflective digital holographic microscopy (DHM), scanning electron microscopy (SEM), and the chemical components produced in the pitting process were analysed by X-ray energy dispersive spectroscopy (EDS). The results show that the CR bars have a higher resistance to pitting corrosion than the LC bars. This is primarily because of the periodic occurrence of metastable pitting during pitting development. Compared to the pitting process in the LC bars, the pitting depth grows slowly in the CR bars, which greatly reduces the risk of pitting. The possible reason for this result is that the capability of the CR bars to heal the passivation film helps to restore the metastable pits to the passivation state.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering

Passivation of Hot-Rolled Rebars

Passivation and Corrosion of Rebar with Mill Scale (Ⅲ): Pseudo Passivation

Passivation and Corrosion of Black Rebar with Mill Scale

Corrosion of Hot-Rolled Rebars

The Electrochemical Characterization of Rebar Passivation Film in Simulated Concrete Media

Passivation and Depassivation of HPB335 Carbon Steel in Simulated Concrete Pore Solution

RESEARCH ON PASSIVATION BEHAVIOR OF REBAR WITH MILL SCALE AND STAINS IN STRONG ALKALI

Protection of Hot-Rolled Rebars

Distribution of millscale on corroded steel bars and penetration of steel corrosion products in concrete

Mill Scale and Corrosion Layer at Concrete Surface Cracking

Mill Scale of Hot-Rolled Rebars

Passivation performance of Nb microalloyed rebar in concrete carbonation environments with different pH

Chemical Composition of Corrosion Products of Rebar Caused by Carbonation and Chloride

Experimental study on passivation and corrosion performances of pre-rusted steel in simulated concrete pore solution

Enhanced passivation of galvanized steel bars in nano-silica modified cement mortars

Effects of varying pH on the passive film formation in high-strength anti-seismic rebar

Semiconducting Behaviour and Corrosion Resistance of Passive Film on Corrosion-Resistant Steel Rebars

A Self-Balanced Electrochemical Model for Corrosion of Reinforcing Steel Bar in Considering the Micro-Environments in Concrete

Macrocell Corrosion Behavior of Steel Bar with Different Connection

Effect of Nb contents on the passivation behavior of high-strength anti-seismic rebar in concrete environments

Pitting Corrosion Behaviour of New Corrosion-Resistant Reinforcement Bars in Chloride-Containing Concrete Pore Solution