Abstract:In recent years, inspired by “biomimicry”, superhydrophobic surfaces have gained significant attention. Superhydrophobic surfaces demonstrate notable advantages in addressing interfacial issues, and superhydrophobic coatings exhibit excellent waterproofness, anti-fouling, self-cleaning, anti-corrosion, and additional capabilities, making them promising next-generation waterproof materials. However, the complex preparation process, coupled with poor wear resistance and environmental durability, severely limits their practical applications. Therefore, this article started from simplifying the preparation process and improving the durability of the coatings. Epoxy resin (E51) was used as the film-forming material, and carbon nanotubes (CNTs) and dual-sized SiC particles (nano-SiC and micro-SiC) were used as the fillers. Room temperature vulcanized silicone rubber (RTV) was used as a binder interacting with epoxy resin to promote the interface interaction between the fillers and the polymers. This process resulted in the successful preparation of superhydrophobic coatings with outstanding comprehensive performance. When the ratio of μ-SiC to n-SiC was 1:1, the prepared coating exhibited the best superhydrophobic properties with a water contact angle (WCA) of 167.4° and a sliding angle (SA) of 4.6°. Even after undergoing severe mechanical tests, such as sandpaper abrasion for 1000 cycles, sand impact for 100 cycles, cross-cut test, and tape-peeling for 70 cycles, the coatings still maintained their non-wetting Cassie-Baxter state. Furthermore, even after immersion in strong acid, strong alkali and 3.5 wt% NaCl solutions for 6 days, keeping at 500 °C for 2 hours, and exposure to ultraviolet for 6 days, the coatings still exhibited excellent superhydrophobicity. This suggested that the prepared coating had excellent chemical stability and high-temperature resistance. In addition, the superhydrophobic coating exhibited exceptional capabilities in self-cleaning, anti-corrosion, anti-icing, and de-icing properties. Furthermore, this coating, applicable to diverse substrates including board, steel, paper, and glass, demonstrated an impressive water contact angle (WCA) and sliding angle (SA). The spraying method offers the benefits of simplicity and cost-effectiveness. This is poised to significantly broaden its practical applications in various fields, including construction, transportation, and the chemical industry.

Facile and Eco-Friendly Fabrication of Superhydrophilic and Superhydrophobic Sic Surfaces by Nanosecond Laser Treatment

Atmosphere-Mediated Superhydrophobicity of Rationally Designed Micro/Nanostructured Surfaces

Laser Textured Superhydrophobic SiC Ceramic Surface and the Performance of Condensation Heat Transfer

A Combined Etching Process Toward Robust Superhydrophobic Sic Surfaces

Fabricating physicochemical microstructures with super hydrophilicity on Cf/SiC composites surface via picosecond-laser induced ablation

Superhydrophobic surface fabricated by nanosecond laser and perhydropolysilazane

Achieving of Bionic Super-Hydrophobicity by Electrodepositing Nano-Ni-pyramids on the Picosecond Laser-Ablated Micro-Cu-cone Surface

Hierarchical Micro/Nanostructures with Anti-Reflection and Superhydrophobicity on the Silicon Surface Fabricated by Femtosecond Laser

Femtosecond laser processed superhydrophobic surface

Fabrication of Air-Permeable Superhydrophobic Surfaces with Excellent Non-Wetting Property

Experimental and modeling study of laser induced silicon carbide/graphene on cotton cloth for superhydrophobic applications

Superhydrophobic Surfaces Prepared by Microstructuring of Silicon Using a Femtosecond Laser.

One-Step Fabrication of Robust Superhydrophobic Steel Surfaces with Mechanical Durability, Thermal Stability, and Anti-icing Function.

Fabrication of high-durability superhydrophobic coatings based on dual-sized SiC particles

Facile preparation of robust superhydrophobic ceramic surfaces with mechanical stability, durability, and self-cleaning function

Fabrication of a Scratch & Heat Resistant Superhydrophobic SiO2 Surface with Self-Cleaning and Semi-Transparent Performance

Fabrication of superhydrophilic or superhydrophobic self-cleaning metal surfaces using picosecond laser pulses and chemical fluorination

Construction of superhydrophobic tungsten carbide via laser processing and its thermal, chemical and mechanical properties

Femtosecond and picosecond laser fabrication for long-term superhydrophilic metal surfaces

Fabricating Superhydrophobic and Oleophobic Surface with Silica Nanoparticles Modified by Silanes and Environment-Friendly Fluorinated Chemicals

Facile laser-based process of superwetting zirconia ceramic with adjustable adhesion for self-cleaning and lossless droplet transfer