Abstract:Laser irradiation is a popular method to produce microtextures on metal surfaces. However, the common laser-produced microtextures were hierarchical (multiscale), which may limit their applicability. In this paper, a method of two-step laser irradiation, combining first-step strong ablation and sequentially second-step gentle ablation, was presented to produce micron-rough surface with single-scale microtextures. The effect of laser fluence on the Ti–6Al–4V surface morphology and wettability were investigated in detail. The morphology results revealed that the microtextures produced using this method gradually evolved from multiscale to single-scale meanwhile from microprotrusions to microholes with increasing the second-step laser fluence from 0.0 to 2.4 J/cm2. The wettability and EDS/XPS results indicated that attributing to the rich TiO2 content and micron roughness produced by laser irradiation, all the two-step laser-irradiated surfaces exhibited superhydrophilicity. In addition, after silanization, all these superhydrophilic surfaces immediately turned to be superhydrophobic with close water contact angles of 155–162°. However, due to the absence of nanotextures, the water-rolling angle on the superhydrophobic surfaces with single-scale microtextures distinctly larger than those with multiscale ones. Finally, using the two-step laser-irradiation method and assisted with silanization, multifunctional superhydrophobic Ti–6Al–4V surfaces were achieved, including self-cleaning, guiding of the water-rolling direction and anisotropic water-rolling angles (like the rice-leaf), etc.

Superhydrophobic Surfaces Prepared by Microstructuring of Silicon Using a Femtosecond Laser.

Hierarchical Micro/Nanostructures with Anti-Reflection and Superhydrophobicity on the Silicon Surface Fabricated by Femtosecond Laser

Superhydrophobic Surfaces Fabricated by Microstructuring of Stainless Steel Using A Femtosecond Laser

Comparison of structures and hydrophobicity of femtosecond and nanosecond laser-etched surfaces on silicon

Femtosecond Laser Fabricated Elastomeric Superhydrophobic Surface with Stretching-Enhanced Water Repellency

Surface topography by water jet-guided laser texturing on wettability of monocrystalline silicon

Study of surface wettability on fused silica by ultrafast laser-induced micro/nano-surface structures

Femtosecond laser processed superhydrophobic surface

A Superhydrophilic Silicon Surface Enhanced by Multiscale Hierarchical Structures Fabricated by Laser Direct Writing

Superhydrophobic Surface by Laser Ablation of PDMS

Superhydrophobic Silicon Surfaces with Low Light Reflectivity

PFAS-free Superhydrophobic Surfaces using Femtosecond Laser Processing and Hot-Filament Chemical Vapor Deposition

Superhydrophobic Surfaces Fabricated by Femtosecond Laser with Tunable Water Adhesion From Lotus Leaf to Rose Petal.

Fabrication of Superhydrophobic Ti–6Al–4V Surfaces with Single-Scale Micotextures by using Two-Step Laser Irradiation and Silanization

Superhydrophobic and Anti‐Icing Surface by Femtosecond Laser Direct Writing

A simple way to achieve pattern-dependent tunable adhesion in superhydrophobic surfaces by a femtosecond laser

Picosecond laser processing super-wetting surfaces with hierarchical structures for passive driving of microfluidics

Long term superhydrophobic and hybrid superhydrophobic/superhydrophilic surfaces produced by laser surface micro/nano surface structuring

Preparation of Hydrophobic/Superhydrophobic Surface on Silicon Wafer by Reactive Ion Etching and Self-assembled Monolayers

Transparent superhydrophobic glass prepared by laser-induced plasma-assisted ablation on the surface

Ultralow Hysteresis Superhydrophobic Surfaces by Excimer Laser Modification of SU-8