Abstract:Chemical vapor deposition (CVD) diamond crystal is considered as an ideal material platform for Raman lasers with both high power and good beam quality due to its excellent Raman and thermal characteristics. With the continuous development of CVD diamond crystal growth technology, diamond Raman lasers (DRLs) have shown significant advantages in achieving wavelength expansion with both high beam quality and high-power operation. However, with the output power of DRLs reaching the kilowatt level, the adverse effect of the thermal impact on the beam quality is progressively worsening. Aiming to enunciate the underlying restrictions of the thermal effects for high-power DRLs (e.g., recently reported 1.2 kW), we here establish a thermal-structural coupling model, based on which the influence of the pump power, cavity structure, and crystal size have been systematically studied. The results show that a symmetrical concentric cavity has less thermal impact on the device than an asymmetrical concentric cavity. Under the ideal heat dissipation condition, the highest temperature rise in the diamond crystal is 23.4 K for an output power of ~2.8 kW. The transient simulation further shows that the heating and cooling process of DRLs is almost unaffected by the pump power, and the times to reach a steady state are only 1.5 ms and 2.5 ms, respectively. In addition, it is also found that increasing the curvature radius of the cavity mirror, the length and width of the crystal, or decreasing the thickness of the crystal is beneficial to alleviating the thermal impact of the device. The findings of this work provide some helpful insights into the design of the cavity structure and heat dissipation system of DRLs, which might facilitate their future development towards a higher power.

Laser System Based on Gradient Doped Crystal: A Promising High Power Laser System with Low Thermal Effect

Growth of a Gradient-Doped Single-Crystal Rod with Designable Distribution of Doped Ions by a Laser-Heated Pedestal Growth Method

High Efficient Laser Operation Of The High-Doped Nd : Yag Crystal Grown By Temperature Gradient Technology

Gradient-index Nd : YAG crystal fiber laser

Analysis on Temperature Field of Laser Crystal in a Super High Power Solid-State Laser

The Research on the Edge Thermal Effect of the Thin Disk Crystal in Thin Disk Lasers

Analysis Of Nonlinear Self-Focusing Phenomenon In High-Power Laser System Based On Ray-Tracing

11-Watt Single-Frequency 1342-Nm Laser Based on Multi-Segmented Nd:YVO 4 Crystal

Highly doped Nd:YAG crystal used for microchip lasers

Study on Optical Characteristics of Nd:YVO4/YVO4 Composite Crystal Laser

Research of Quasi-Three-Level Thermal Effect of Diode-Pumped Tm: Yag Crystal

High-efficiency laser-diode side-pumped Nd:YAG laser

Temperature distribution and the laser performance of LD end-pumped LuYSGG/Er:LuYSGG composite crystal

Crystal growth and laser properties of gradual concentration Nd-doped yttrium aluminum garnet serial crystals

An experimental and theoretical study on Dy 3+ -doped ZBLAN fiber laser, core-pumped at 1.1 μm

Study on Thermal Effects of LD End-Pumped High-Repetition-rate Nd:YAG Laser

Improvement of 2.8 μm laser performance on LD side-pumped LuYSGG/Er:LuYSGG/LuYSGG bonding crystal

Enhanced efficiency and thermal performance of multistage gradient doping Ce:YAG transparent ceramics for laser lighting

Analysis of Thermal Effects in Kilowatt High Power Diamond Raman Lasers

Thermal performance of a laser-diode end-pumped Nd:YVO 4 slab crystal cooled by a pair of microchannel heat sinks

Investigation of the Photothermal Weak Absorption and Laser Damage Characteristics of a Nd,Y:SrF2 Crystal