Abstract:Based on the material properties of 47 Yb3+‐doped phosphate fibers with different sizes and lengths, a laser performance estimation model was established to estimate the laser wavelength just above the threshold (λth), the laser threshold (Pth) and the laser slope efficiency (η). This model was solved via a numerical computing method with an accuracy of 0.01. Under the material constraints of this model, λth, Pth, and η were investigated by sensitivity analysis and Monte Carlo numerical simulation. The results show that short fibers with a small core diameter may more easily produce a shorter λth. Additionally, for constant material properties, fibers with a longer λth may have a lower Pth and higher η than other fibers. Verifying the above conjecture, an output power of 8.7 W with 35% enhancement in slope efficiency was obtained from an optimized phosphate fiber for an optical path in which the output of the short‐wave laser was inhibited. This model can be extended to simulate the lasing wavelength of multi‐composition fibers, providing a theoretical basis for special laser bands, laser material preparation, and fiber structure design.

An experimental and theoretical study on Dy 3+ -doped ZBLAN fiber laser, core-pumped at 1.1 μm

Theoretical Design and Experimental Research on High Power Yb∶ YAG Ceramic Slab Laser Amplifier

Nonlinearity Optimization of Dissipative-Soliton Fiber Laser for Generation of Pulses with 350 Kw Peak Power

Pump quantum efficiency optimization of 3.5 μm Er-doped ZBLAN fiber laser for high-power operation

The comparative study of high efficiency of Tm^{3+}-doped fiber laser at 1.72 μm for different pump schemes

Numerical Analysis and Experimental Results of Output Characteristics for Strongly Pumped Yb3+-doped Double-Clad Fiber Laser

All-Solid Silicate Photonic Crystal Fiber Laser with 13.1 W Output Power and 64.5% Slope Efficiency

Theoretical Modeling of 4.3 Μm Mid-Infrared Lasing in Dy3+-Doped Chalcogenide Fiber Lasers

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

Slope efficiency over 30% single-frequency ytterbium-doped fiber laser based on Sagnac loop mirror filter

High-efficiency longwave 2085 nm laser output in low-loss Ho 3+ -doped fluorotellurite glass fiber by 1976 nm in-band pumping

3 $\mu$m Watt-Level All-Fiber Lasers Based on Mid-IR Dielectric-Coated Fiber Mirrors

Preparation of Nd3+-doped flurorzirconate glass laser fiber

Highly efficient actively Q-switched Er^3+-doped ZBLAN fiber laser operating around 2.8 μm using a La_3Ga_5SiO_14 electro-optical modulator

Kilowatt-Level High-Efficiency Narrow-Linewidth All-Fiber Tm3+-Doped Laser

Yb-Doped Aluminophosphosilicate Laser Fiber

Material constraint‐based laser performance estimation of Yb 3+ ‐doped phosphate fibers

Narrow Linewidth Tm3+-Doped Large Core Fiber Laser Based on A Femtosecond Written Fiber Bragg Grating

A 4.8-kW high-efficiency 1050-nm monolithic fiber laser amplifier employing a pump-sharing structure

First Experimental Investigation of the Amplification of a Yb-doped Fiber Laser Pumped with 1000 and 1014-Nm Laser Diodes

Yb-doped large-mode-area laser fiber fabricated by halide-gas-phase-doping technique