DC Bias Suppression in Static Power Converter During Catenary Fault Handling for Railway Flexible AC Traction Power System

Ni Tan,Xiaoqian Li,Yingdong Wei,Mingrui Li,Yunzhi Lin,Xu Guo,Jianzheng Liu

DOI: https://doi.org/10.1109/jestpe.2022.3223800

IF: 5.462

2023-01-01

IEEE Journal of Emerging and Selected Topics in Power Electronics

Abstract:Flexible ac traction power supply system (FTPSS) has been a potential candidate for high-speed and heavy-haul railways. The catenary fault is a crucial issue in the FTPSS. Since the static power converters (SPCs) become the main source, SPC is required to switch between the voltage-frequency and the fault-current control (FCC) modes, in order to achieve fault detection and rapid system recovery. However, inappropriate switching methods may lead to violent changes in instantaneous voltage. Therefore, serious DC bias of the SPC output transformer may occur and excite severe overcurrent. It results in the tripping of SPCs and the failure of system recovery and severely undermines the reliability of FTPSS. To address this issue, this article analyzes and reveals the mechanism of this DC bias phenomenon. The voltage-time product imbalance during the mode switching process is the main cause of DC bias, and it is related to the voltage phase at the switching instants. Accordingly, a combined method of voltage waveform splicing and DC bias elimination control is proposed. Overcurrent can be avoided, and smooth control-mode switching and rapid system recovery can be achieved. Simulation and experimental results verify the validation of the proposed method.