Abstract:Carrier frequency current harmonic peaks induced by pulsewidth modulation (PWM) in motion control systems will cause high-frequency torque ripple, efficiency decrease, and electromagnetic interference problems. It is proved in this article that carrier-frequency harmonic current components in dual three-phase permanent magnet synchronous motor (DTP-PMSM) systems exhibit a different distribution and are more severe compared to the three-phase ones due to the existence of the low-impedance harmonic subspace, thereby limiting the further application of DTP-PMSMs. To address this issue, this article proposes an advanced carrier phase-shift modulation strategy. First, by introducing a pi/2 phase shift between two PWM modules, the dominating first carrier frequency harmonic current components in z(1)-z(2) subspace are halved. The high-frequency torque ripple, located at second carrier frequency, is also suppressed. Periodic frequency modulation is utilized in the proposed strategy to further suppress the high-frequency harmonic current components in both alpha-beta and z(1)-z(2) subspaces. The effectiveness of the proposed strategy is demonstrated theoretically and verified by simulation and experiments. DC-link current can also benefit from the proposed strategy. Compared with conventional space vector pulsewidth modulation (SVPWM) and random SVPWM, the proposed strategy has a better harmonic suppression effect without inducing distortion.

DC-link Voltage Fluctuation Compensation for Selected Harmonics Elimination under Low Switching Frequency

A Novel Harmonic Current Control Method for Torque Ripple Reduction of SPMSM Considering DC-Link Voltage Limit

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

Negative Sequence Current Suppression of Dual Three-Phase Permanent Magnet Synchronous Machines Considering Inductance Asymmetry

Compensation of DC-Link Voltage Fluctuation for Railway Traction PMSM in Multiple Low-Switching-Frequency Synchronous Space Vector Modulation Modes.

DC-Link-Fluctuation-Resistant Predictive Torque Control for Railway Traction Permanent Magnet Synchronous Motor in the Six-Step Operation

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

Repetitive Compensation of Fluctuating DC Link Voltage for Railway Traction Drives

A Deadbeat Predictive Current Harmonics Suppression Method for IPMSM Based on Quasi Proportional Resonant Control

DC-link-Fluctuation-Resistant Control Scheme for High Power Traction PMSM in Six-Step Mode

A Harmonic Elimination Approach Based on Moving Average Filter for Cascaded DSTATCOM.

Influence Of Dc-Link Voltage Fluctuation On The Performance Of Railway Traction Drive With Different Low Switching Frequency Modulation Techniques

Disturbance Compensation-Based Model Predictive Flux Control of SPMSM with Optimal Duty Cycle

DC-Link Capacitor Ripple Current Suppression Strategy Based on Harmonic Injection for PMSM Drives

An Improved Modulation Strategy with Torque Ripple Suppression Method for OEW-PMSM Drives with Common DC Bus

Hybrid PWM and Smooth Switching Technology for Traction PMSM Drives in Low Switching Frequency

Repetitive prediction of fluctuating DC link voltage for traction drives

Harmonic Current Suppression Control Strategy For Hybrid Excited Vernier Pm Machines

Research on Flux-Weakening and DC-link Voltage Compensation of PMSM Drive System Without Electrolytic Capacitor

Cogging Torque Compensation for Flux-switching Permanent Magnet Motor Based on Current Harmonics Injection

High-Frequency Current Harmonic Analysis and Suppression in Dual Three-Phase PMSMs with Advanced Carrier Phase-Shift PWM