Abstract:Five-phase permanent magnet synchronous motors offer merits of high fault tolerant capability and high torque per rms ampere and, thus, are suitable for applications, such as aerospace and electric vehicles. However, the complex machine model causes difficulties in controller design. Besides, having 32 voltage vectors with various effects on currents and torque, the selection of the optimal switching state becomes a challenge to achieve a performance tradeoff. This paper proposes an improved model predictive direct torque control (MPDTC) strategy consisting of a quadratic evaluation method (QEM) and a harmonic voltage elimination method (HVEM). In QEM, the preliminary vector is first chosen from the vectors of the outer decagon according to a cost function for torque and flux regulation. This preliminary vector, composed of three sets of different amplitudes, is further synthesized according to the error between the actual torque/flux and the references. In this way, the optimal voltage vector can be obtained without significantly increasing the computational burden. In HVEM, by subtracting the harmonics voltage component from the vector determined previously in QEM, the final voltage vector is obtained for mitigating stator harmonic currents. The proposed control strategy is compared with the conventional MPDTC approach. The results confirm the effectiveness of the proposed methods with good steady-state performance while maintaining quick dynamic responses.

DC-Link-Fluctuation-Resistant Predictive Torque Control for Railway Traction Permanent Magnet Synchronous Motor in the Six-Step Operation

DC-link-Fluctuation-Resistant Control Scheme for High Power Traction PMSM in Six-Step Mode

A Sequential Direct Torque Control Scheme for Seven-Phase Induction Machines Based on Virtual Voltage Vectors

A Novel Sequential Direct Torque Control Scheme for Seven-phase Induction Motors

DC-link Voltage Fluctuation Compensation for Selected Harmonics Elimination under Low Switching Frequency

Research on Direct Torque Control of Induction Machine Based on Torque Prediction

An Error Tracking Dead-beat Model Predictive Torque Control for Open-Winding Permanent Magnet Synchronous Motor with Common DC Bus

Deep Flux Weakening Control With Six-Step Overmodulation For A Segmented Interior Permanent Magnet Synchronous Motor

Direct torque control of induction motor for railway traction in whole speed range

A Novel Torque Ripple Reduction Strategy for Predictive Direct Torque Controlled Pmsg

Direct Torque Model Predictive Control of a Five-Phase Permanent Magnet Synchronous Motor

Compensation of DC-Link Voltage Fluctuation for Railway Traction PMSM in Multiple Low-Switching-Frequency Synchronous Space Vector Modulation Modes.

Torque Ripple Reduction of the Torque Predictive Control Scheme for Permanent-Magnet Synchronous Motors

Direct torque control of six-phase permanent magnet synchronous motor with double Y shifted 30°

An Improved Model Predictive Direct Torque Control Strategy for Reducing Harmonic Currents and Torque Ripples of Five-Phase Permanent Magnet Synchronous Motors.

Predictive control of torque and flux of induction motor drives

A new full-speed range direct torque control strategy for induction machine

Applications of Induction Motor Drive Based on DTC in Railway Traction

A Control Scheme for a High Speed Railway Traction System Based on High Power PMSM

Computationally efficient multi‐step direct predictive torque control for surface‐mounted permanent magnet synchronous motor

An Improved Model Predictive Torque Control Strategy of a Shearer Semi-direct Permanent Magnet Synchronous Motor Based on Duty Cycle