Abstract:The traditional direct torque control (DTC) strategy utilizes the largest 14 voltage vectors for a seven-phase induction machine (7PIM), which is directly extended from the three-phase counterparts. This method suffers from the issues of severe harmonic currents and torque ripple for multiphase ones. This article first puts forward the concept of virtual vectors for a 7PIM. This can efficiently eliminate the third- and fifth-order harmonic currents. However, the DTC strategy based on the virtual voltage vector has insignificant effect on reducing the torque ripple. Then, the torque ripple caused by these virtual vectors in different torque and speed conditions is investigated. Analysis shows that there are some additional degrees of freedom while choosing the applied voltage vector. A novel sequential strategy integrated with duty ratio optimization algorithm is proposed to select the optimal voltage vector that can significantly alleviate the torque ripple. Experimental results verified that the proposed method can effectively reduce the dynamic and steady-state torque ripple as well as the harmonic current.This article utilizes a 7PIM for an illustration, but it should be mentioned here that the proposed strategy is applicable for multiphase machines with any number of phases.

Applications of Induction Motor Drive Based on DTC in Railway Traction

Direct torque control of induction motor for railway traction in whole speed range

Control strategies of direct torque control of induction motor applied to traction

Speed-sensorless Direct Torque Control System of Induction Motor

A Sequential Direct Torque Control Scheme for Seven-Phase Induction Machines Based on Virtual Voltage Vectors

Research on Direct Torque Control of Induction Machine Based on Torque Prediction

DC-Link-Fluctuation-Resistant Predictive Torque Control for Railway Traction Permanent Magnet Synchronous Motor in the Six-Step Operation

Implementation of Direct Torque Control Scheme for Induction Machines with Variable Structure Controllers

Improved Direct Torque Control strategy for Wide Range Speed Control of Induction Motor Drives

Extending DC Bus Utilization for Induction Motors with Stator Flux Oriented Direct Torque Control

A new full-speed range direct torque control strategy for induction machine

Implementation of Direct Torque Control with Gto Inverter for Locomotive Drives

Research of Direct Torque Control on Traction Drive System of CRH3 EMU

A three-level speed sensor-less DTC drive of induction motor based on a full-order flux observer

Research on Torque Ripple Minimization Strategy for Direct Torque Control of Induction Motors

New Torque Direct Control Scheme Of Induction Machines And Its Dsp-Based Implementation

Direct Torque Control Strategies of Induction Machine: Comparative Studies

A Control Scheme for a High Speed Railway Traction System Based on High Power PMSM

Direct Instantaneous Torque Control of Srm Based on New Flux Linkage Detection Method

Low-Speed Performance Improvement of Direct Torque Control for Induction Motor Drives Fed by Three-Level NPC Inverter

A New Direct Torque Control of an Efficient and Cost-Effective Traction System Using Two Squirrel Cage Induction Motors Feed by a Single Inverter