Abstract:The advantages of high-speed permanent magnet synchronous machines (HSPMSM) include higher torque, efficiency, power density, reliability and lower maintenance cost. The fundamental frequency can be >1000Hz with relatively small inductance usually due to fewer number of turns. Consequently, for the same amount of voltage ripple, higher current ripple exists, leading to a significant amount of harmonic content. Even though wide bandgap semiconductors are gaining momentum for higher switching frequency operation, there are silicon based adjustable speed drives (ASD) limiting arbitrary high switching speed. Various synchronous space vector pulse width modulation (SVPWM) strategies have been applied in high power applications, but their effects on HSPMSM are lacking in literatures. This paper presents the quantitative current harmonics performance comparison on a 380V, 14000RPM, 0.95Nm HSPMSM. Mathematical models of PMSM, half-wave symmetry (HWS), quarter-wave symmetry (QWS), and three-phase symmetry (TPS) are described. Strategies of conventional space vector (CSVS), basic bus clamping (BBCS), and boundary sampling (BSS) are evaluated in simulation studies and analysis. Experimental platform has been established and results are obtained to validate the analytical and simulation effectiveness.

Research on the electric locomotive running and cutover methods using SHEPWM in whole speed range

DC-link Voltage Fluctuation Compensation for Selected Harmonics Elimination under Low Switching Frequency

Synchronous SVPWM over-modulation method based on zero-sequence voltage injection in locomotive traction

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

A Control Scheme for a High Speed Railway Traction System Based on High Power PMSM

Application of Two Kinds of Modulation Methods in Locomotive Traction Converters

Research on Single-Pulse Control of Traction Pmsm in High Speed Train Based on Co-Simulation Model

Multi-mode SHEPWM with Low Switch Frequency for Traction Application

Application of Improved Synchronous SVM Over-modulation in Locomotive Traction Permanent Magnet Synchronous Motor

Investigation on Open Winding Pmsg System with the Integration of Full Controlled and Uncontrolled Converter

Open Winding PMSM System for Electric Vehicles Collaboratively Supplied by the Z-Source and Voltage Source Converters

Synchronous Single Vector Modulation Strategy for Low-Carrier-Ratio High-Power Applications

Quantitative Harmonics Performance Evaluation of High-Speed Permanent Magnet Synchronous Machine under Various Synchronous SVPWM Strategies

A Sensorless Drive Strategy for Open-End Winding PMSM with Common DC Voltage Based on Lower Switching Frequency

Rotror Flux-oriented Control of PMSM with Synchronized Carrier SVPWM and Zero Sequence Voltage Injection Over-modulation for Traction Application in Very Low Switching Frequency

An Improved Overmodulation Strategy with Phase Shift for Single DC-Link Shunt PMSM Drives

Modulation and Control Strategy for Electric Traction Drive System of Rail Transit Vehicles

Influence Of Dc-Link Voltage Fluctuation On The Performance Of Railway Traction Drive With Different Low Switching Frequency Modulation Techniques

Hybrid PWM and Smooth Switching Technology for Traction PMSM Drives in Low Switching Frequency

Simulation Research on Three-phase Induction Motor Winding Change-over Speed Regulation Systems Based on Maxwell and Simplorer

Efficiency Optimization Control of Permanent-Magnet Synchronous Machines for Electric Vehicle Traction Systems