Abstract:Traditional low voltage high power wind energy conversion system (WECS) requires heavy cables and large step-up grid interfacing transformers. In recent years, power rating of offshore wind turbines already exceeds 10 MW, and medium voltage (MV) converters have become strongly demanded. Modular multilevel converter (MMC) is suitable for MV high power applications. However, there are two technical difficulties for MMC when applied in MV permanent magnet synchronous generator (PMSG) WECS. The first one is the large sub module (SM) voltage fluctuation caused by low frequency and high amplitude PMSG phase current. The other one is the low voltage ride through (LVRT) problem. Overall control strategy based on carrier-phase-shifted -sinusoidal pulse width modulation technique of the MMC WECS is proposed. For the first difficulty mentioned, a second-order circulating current injection method based on closed-loop control is proposed. For the LVRT problem, a distributed braking chopper solution is provided. The effectiveness of the injection method and the distributed braking chopper solution are validated by simulation of a 5 MW/3.3 kV MMC WECS. Influences of the current injection amplitude on SM voltages and arm currents are discussed and a trade-off method is given to optimise system design, which is also verified by simulation.

Investigation on Open Winding Pmsg System with the Integration of Full Controlled and Uncontrolled Converter

Investigation on Open-Winding PMSG System Fed by Three Level NPC Converter and Diode Converter

Zero Sequence Current Suppression Strategy for Open Winding PMSG Fed by Semi-controlled Converter

Sensorless Control of Pmsg Based on Dual Two-Level Inverter Open Winding Configuration for Wind Turbines

Model Predictive Control Of Semi-Controllable Open Winding Pmsg Based On Three Level Npc Converter

Control Strategy on Open Winding Permanent Magnet Synchronous Generator System with Single-Side Controllable Rectifier

Novel Topology and Control Strategy of HVDC Grid Connection for Open Winding PMSG Based Wind Power Generation System

Control Strategy for Open Winding PMSM System Supplied by the Z-source and Voltage Source Integrated Converters

Dual Stator Windings PMSG Fed by Half-Controlled Converters for Wind Power Application

Control Strategy of Permanent Magnet Wind Generator Based on Open Winding Configuration

Investigation and Suppression of Current Zero Crossing Phenomenon for a Semicontrolled Open-Winding PMSG System

Current Zero-Crossing Duration Reduction of a Semicontrolled Open-Winding PMSG System Based on Third Harmonic Current Injection

Zero-Sequence Current Suppression Strategy of Open-Winding PMSG System With Common DC Bus Based on Zero Vector Redistribution

Open Winding PMSM System for Electric Vehicles Collaboratively Supplied by the Z-Source and Voltage Source Converters

Application of Modular Multilevel Converter in Medium Voltage High Power Permanent Magnet Synchronous Generator Wind Energy Conversion Systems

Research on the unit power factor control of directly-driven PM wind generator

Complementary half controlled converter for directly-driven PM synchronous generator in wind power generation application

Improved load-adaptive control strategy for PMSG based stand-alone wind energy generation system

Enhanced Control Strategies of Permanent Magnet Synchronous Wind Power Generation System under Unbalanced Grid Voltage Conditions

Analyze of current control strategy based on vector control for permanent-magnet synchronous generator in wind power system

Control strategy of permanent magnet synchronous generator of directly driven wind turbine