Abstract:This paper proposes a high-precision mathematical modeling scheme for interior permanent magnet synchronous motors (IPMSMs), which gives full consideration to the saturation and cross-coupling influence based on the finite element analysis (FEA). Firstly, the IPMSM model is built in ANSYS/Maxwell to acquire the variable stator inductance and flux linkage parameters under various kinds of working conditions. Secondly, the obtained d-axis inductance, q-axis inductance, and rotor flux linkage are further calculated, processed, and pre-stored in three two-dimensional (2-D) look- up-tables (LUTs). Thirdly, the IPMSM model is built in MATLAB/Simulink based on three established tables. Finally, by looking up the three tables according to the real-time d-axis and q-axis currents, the IPMSM system can be simulated under different working conditions for various control methods. With the developed high-precision FEA-based mathematical modeling scheme, the simulation results will be more accurate and the simulation process will be more efficient with significant time savings and better dynamic performance. To validate the effectiveness of the proposed modeling scheme, a Space Vector Pulse Width Modulation (SVPWM) control system with maximum torque per ampere (MTPA) and flux-weakening (FW) control as well as feed-forward decoupling control is built based on a 15kW IPMSM prototype.

Space Vector Modulation Based On Lookup Table For A Dual-Inverter-Fed Open-End Winding Pmsm Drive

FEA-Based Mathematical Modeling and Simulation for IPMSM Drive with Consideration of Saturation and Cross-Coupling Influence

Comparative Study of Flux-Weakening Control Methods for Pmsm Drive over Wide Speed Range

A Sensorless Drive Strategy for Open-End Winding PMSM with Common DC Voltage Based on Lower Switching Frequency

Control Strategy for Open Winding PMSM System Supplied by the Z-source and Voltage Source Integrated Converters

Sensorless Control of Pmsg Based on Dual Two-Level Inverter Open Winding Configuration for Wind Turbines

An Improved Modulation Technique with Minimum Switching Actions within One PWM cycle for Open-End Winding PMSM System with Isolated DC BUS

Investigation on Open Winding Pmsg System with the Integration of Full Controlled and Uncontrolled Converter

Inverter Reconstruction Approach for Open-End Winding Five-Phase PMSM With Pattern-Based Vector Synthesis and Hybrid SVPWM Modulation

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

A Novel SVPWM Scheme for Field-Oriented Vector-Controlled PMSM Drive System Fed by Cascaded H-Bridge Inverter

Investigation of Permanent Magnet Synchronous Motor System Used in Electric Vehicles Based on Space Vector Modulation

Synchronous Single Vector Modulation Strategy for Low-Carrier-Ratio High-Power Applications

Analysis of zero state vector distribution based on space vector PWM techniques for dual Y shift 30 degree PMSM

A Novel 3-D Space Vector Modulation Strategy for Open-End Winding PMSM

A Novel Two-Mode Inverter Based Open-Winding PMSM Drive and Its Modulation Strategies

A Unified Modulation Strategy Based on Current Prediction Control for Open-Winding PMSM with Four Bridge Arms

Hybrid Vector Model Predictive Control for Open-winding PMSM Drives

Strategy of Synchronized SVPWM for Dual Three-Phase Machines in Full Modulation Range

Simplified Modulation Scheme for Open-End Winding PMSM System with Common DC Bus under Open-Phase Fault Based on Circulating Current Suppression

A Coordinated Svpwm Without Sector Identification for Dual Inverter Fed Open Winding Ipmsm System