Abstract:Zero-sequence current (ZSC) is inevitable in the structure of an open-end winding permanent-magnet synchronous machine (OW-PMSM) system with a common dc bus due to the simultaneous existence of the ZSC loop and the zero-sequence voltage (ZSV) caused by the inverters and third electromotive force. To suppress the ZSC, a novel strategy with a reduced switching frequency is proposed in this paper. The main contribution of the proposed method is that the ZSC is suppressed totally with a reduced switching frequency. The duration time of the active voltage vectors is redistributed to generate the reference voltage in a zero-sequence loop, which leads to the suppression of the ZSC. Different from the conventional method, only the active voltage vectors instead of the zero voltage vectors are employed to suppress the ZSC. Consequently, the switching frequency in the modulation process can be reduced. In addition, the effective modulation range of the ZSV is analyzed, which further reveals the relationship among the effective modulation of the ZSV, the modulation index, and the ratio of the third flux linkage component to the fundamental flux linkage component. Finally, the effectiveness of the proposed method is validated by an OW-PMSM experimental setup with a common dc bus. Moreover, the proposed method is experimentally compared with the existing methods.

An Improved Modulation Technique with Minimum Switching Actions within One PWM cycle for Open-End Winding PMSM System with Isolated DC BUS

Space Vector Modulation Based On Lookup Table For A Dual-Inverter-Fed Open-End Winding Pmsm Drive

Improved Modulation Method with Reduced Switching Frequency for OW‐PMSM System with Common DC Bus

A Sensorless Drive Strategy for Open-End Winding PMSM with Common DC Voltage Based on Lower Switching Frequency

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

Simplified Modulation Scheme for Open-End Winding PMSM System with Common DC Bus under Open-Phase Fault Based on Circulating Current Suppression

Fault-tolerant Control Strategy with Reduced Switching Frequency for Inverter-Based Fault in Open-Winding PMSM System

An Improved Power Balancing Control Scheme for Open‐winding Permanent Magnet Synchronous Machine Based on Redistribution of Reference Voltages

Control Strategy for Open Winding PMSM System Supplied by the Z-source and Voltage Source Integrated Converters

An Improved Near-State Pulse-Width Modulation with Low Switching Loss for a Permanent Magnet Synchronous Machine Drive System

A Unified Modulation Strategy Based on Current Prediction Control for Open-Winding PMSM with Four Bridge Arms

Improved PWM Modulation Strategy for CHB Multilevel Converter

Zero Sequence Current Suppression Strategy for Open Winding PMSG Fed by Semi-controlled Converter

Hybrid Svpwm Technique for Reduced Torque Ripple in Permanent Magnet Synchronous Motor

A Coordinated Svpwm Without Sector Identification for Dual Inverter Fed Open Winding Ipmsm System

Investigation on Open Winding Pmsg System with the Integration of Full Controlled and Uncontrolled Converter

Open Winding PMSM System for Electric Vehicles Collaboratively Supplied by the Z-Source and Voltage Source Converters

A Hybrid PWM-Based Field Weakening Strategy for a Hybrid-Inverter-Driven Open-Winding PMSM System

Low Switching Frequency SPWM Strategies for Open-Winding Machine With Low Current Harmonics

Simplified PWM for Fault Tolerant Control of Open Winding PMSM Fed by Hybrid Inverter

Zero-Sequence Current Suppression Strategy with Reduced Switching Frequency for Open-End Winding PMSM Drives with Common DC BUS