Abstract:Traditional low voltage high power wind energy conversion system (WECS) requires heavy cables and large step-up grid interfacing transformers. In recent years, power rating of offshore wind turbines already exceeds 10 MW, and medium voltage (MV) converters have become strongly demanded. Modular multilevel converter (MMC) is suitable for MV high power applications. However, there are two technical difficulties for MMC when applied in MV permanent magnet synchronous generator (PMSG) WECS. The first one is the large sub module (SM) voltage fluctuation caused by low frequency and high amplitude PMSG phase current. The other one is the low voltage ride through (LVRT) problem. Overall control strategy based on carrier-phase-shifted -sinusoidal pulse width modulation technique of the MMC WECS is proposed. For the first difficulty mentioned, a second-order circulating current injection method based on closed-loop control is proposed. For the LVRT problem, a distributed braking chopper solution is provided. The effectiveness of the injection method and the distributed braking chopper solution are validated by simulation of a 5 MW/3.3 kV MMC WECS. Influences of the current injection amplitude on SM voltages and arm currents are discussed and a trade-off method is given to optimise system design, which is also verified by simulation.

Investigation on Open-Winding PMSG System Fed by Three Level NPC Converter and Diode Converter

Investigation on Open Winding Pmsg System with the Integration of Full Controlled and Uncontrolled Converter

Model Predictive Control Of Semi-Controllable Open Winding Pmsg Based On Three Level Npc Converter

Zero Sequence Current Suppression Strategy for Open Winding PMSG Fed by Semi-controlled Converter

Sensorless Control of Pmsg Based on Dual Two-Level Inverter Open Winding Configuration for Wind Turbines

Novel Topology and Control Strategy of HVDC Grid Connection for Open Winding PMSG Based Wind Power Generation System

Investigation and Suppression of Current Zero Crossing Phenomenon for a Semicontrolled Open-Winding PMSG System

Application of Modular Multilevel Converter in Medium Voltage High Power Permanent Magnet Synchronous Generator Wind Energy Conversion Systems

Dual Stator Windings PMSG Fed by Half-Controlled Converters for Wind Power Application

Current Zero-Crossing Duration Reduction of a Semicontrolled Open-Winding PMSG System Based on Third Harmonic Current Injection

Control Strategy for Open Winding PMSM System Supplied by the Z-source and Voltage Source Integrated Converters

Zero-Sequence Current Suppression Strategy of Open-Winding PMSG System With Common DC Bus Based on Zero Vector Redistribution

Control Strategy of Permanent Magnet Wind Generator Based on Open Winding Configuration

Control Strategy on Open Winding Permanent Magnet Synchronous Generator System with Single-Side Controllable Rectifier

Research on the unit power factor control of directly-driven PM wind generator

Improved load-adaptive control strategy for PMSG based stand-alone wind energy generation system

Modular Multilevel Inverter with New Modulation Method and Its Application to Photovoltaic Grid-Connected Generator

Open Winding PMSM System for Electric Vehicles Collaboratively Supplied by the Z-Source and Voltage Source Converters

A Sensorless Drive Strategy for Open-End Winding PMSM with Common DC Voltage Based on Lower Switching Frequency

Medium-Voltage Wind Power Converter Based on Three-Level Neutral Point Clamped Topology

A Power Decoupling Control for Wind Power Converter Based on Series-Connected MMC and Open-Winding PMSG