Abstract:When fault occurs on cross-coupling autotransformer (AT) power supply traction network, the up-line and down-line feeder circuit breakers in the traction substation trip at the same time without selectivity, which leads to an extended power failure. Based on equivalent circuit and Kirchhoff's current law, the feeder current characteristic in the substation, AT station and sectioning post when T–R fault, F–R fault, and T–F fault occur are analyzed and their expressions are obtained. When the traction power supply system is equipped with wide-area protection measurement and control system, the feeder protection device in each station collects the feeder currents in other two stations through the wide-area protection channel and a wide-area current differential protection scheme based on the feeder current characteristic is proposed. When a short-circuit fault occurs in the power supply arm, all the feeder protection devices in each station receive the feeder currents with time stamp in other two stations. After data synchronous processing and logic judgment, the fault line of the power supply arm can be identified and isolated quickly. The simulation result based on MATLAB/Simulink shows that the power supply arm protection scheme based on wide-area current differential has good fault discrimination ability under different fault positions, transition resistances, and fault types. The verification of measured data shows that the novel protection scheme will not be affected by the special working conditions of the electrical multiple unit (EMU), and reliability, selectivity, and rapidity of relay protection are all improved.

Ground Fault Analysis and Grounding Method of Static Power Converters in Flexible AC Traction Power Supply Systems

Single-phase-to-ground Fault Detection with Distributed Parameters Analysis in Non-Direct Grounded Systems

DC Bias Suppression in Static Power Converter During Catenary Fault Handling for Railway Flexible AC Traction Power System

Single‐phase Grouding Fault Analysis and Control Scheme of Transformerless Flexible Multistate Switch

Modeling and stability prediction for the static-power-converters interfaced flexible AC traction power supply system with power sharing scheme

Flexible DC System Fault Analysis

Active Disturbance Rejection Control for Static Power Converters in Flexible AC Traction Power Supply Systems

Fault Analysis and Protection in Flexible DC Traction Power Supply System

Modelling and control of a novel AT-fed co-phase traction power supply system for electrified railway

Analysis of short-circuit model for DC traction supply system

Analysis and Protection Scheme of Station Internal AC Grounding Faults in a Bipolar MMC-HVDC System

The Small-Signal Stability Analysis of the Interacted Co-Phase Traction Power Supply System in Electric Railway

Power supply arm protection scheme of high-speed railway based on wide-area current differential

A Methodology for Power Dispatch Based on Traction Station Clusters in the Flexible Traction Power Supply System

Analysis of Fault Characteristics of Distribution Network with PST Loop Closing Device under Small Current Grounding System

Analysis of Common-Mode Voltages in Flexible DC System with Single-Pole Grounded Fault

Flexible Grounding System for Single-Phase to Ground Faults in Distribution Networks: A Systematic Review of Developments

Capacitive Harmonic Analysis and DSTATCOM-based Comprehensive Power Quality Management in Metro Substations

Analysis of Short-Circuit Current Characteristics and Its Distribution of Artificial Grounding Faults on DC Transmission Lines

AC Fault Ride-Through Strategy of MMC-HVDC Connected to Passive Networks

Emergency Control Strategy of Hybrid Advanced Traction Power Supply System based on Multi-Device Collaboration