Abstract:As a common necessity, masks have been used a lot in recent years, and the comprehensive utilization of waste masks has become a research priority in the post-COVID-19 pandemic era. However, traditional disposal methods suffer from a range of problems, including poor utilization and insecurity. To explore new solution ideas and efficiently utilize waste resources, waste masks and biomass wastes were used as raw materials to prepare mask-based biochar (WMB), bio-oil, and pyrolytic gas via oxygen-limited co-pyrolysis in this study. The obtained solid–liquid–gas product was systematically characterized to analyze the physicochemical properties, and the adsorption properties and mechanisms of WMB on the environmental endocrine bisphenol A (BPA) were investigated. The co-pyrolysis mechanisms were also studied in depth. Furthermore, the strengths and weaknesses of products prepared by co-pyrolysis and co-hydrothermal synthesis were discussed in comparison. The results indicated that the waste masks could shape the microsphere structure, leading to richer surface functional groups and stable mesoporous of WMB. Here, the risk of leaching of secondary pollutants was not detected. The theoretical maximum adsorption of BPA by WMB was 28.73 mg·g−1. The Langmuir and Pseudo-second-order models optimally simulated the isothermal and kinetic adsorption processes, which are a composite of physicochemical adsorption. Simultaneous pyrolysis of mask polymers with biomass polymers produces bio-oil and pyrolytic gas, which is rich in high-quality aliphatic and aromatic compounds. This could have potential as an energy source or chemical feedstock. The co-pyrolysis mechanisms may involve the depolymerization of waste masks to produce hydrocarbons and H radicals, which in turn undergo multi-step cleavage and oligomerization reactions with biomass derivatives. It is recommended to use the co-pyrolysis method to dispose of waste masks, as the products obtained are significantly better than those obtained by the co-hydrothermal method. This work provides a new contribution to the resourcing of waste masks into high-quality products.

Biochar-advanced thermocatalytic salvaging of the waste disposable mask with the production of hydrogen and mono-aromatic hydrocarbons

Two Birds with One Stone: High-Quality Utilization of COVID-19 Waste Masks into Bio-Oil, Pyrolytic Gas, and Eco-Friendly Biochar with Adsorption Applications

Co-pyrolysis characteristics and synergistic effects of masks and peanut shells in the preparation of light aromatic hydrocarbons under catalyst

Catalytic co-pyrolysis of solid wastes (low-density polyethylene and lignocellulosic biomass) over microwave assisted biochar for bio-oil upgrading and hydrogen production

Valorizing disposable face masks into non-condensable hydrocarbon gases via optimal reactor configurations in thermal pyrolysis

Co-pyrolysis of heavy bio-oil and disposable masks pyrolysate with Ce/Fe-based oxygen carrier catalyst

Preparing Fuel-Range Chemicals via the Direct and Selective Pyrolysis of Disposable Mask Waste for Sustainable Environment

Pyrolysis of waste surgical masks into liquid fuel and its life-cycle assessment

Mechanistic Analysis of Hydrogen-Rich Co-Gasification of Pine Wood and Polypropylene-Based Waste Masks Using Fe/Dol Catalyst

Monophenols recovery by catalytic pyrolysis of waste sawdust over activated biochar from the brown macroalage Hizikia fusiformis : Mechanism and life-cycle assessment

Synergistic effect of hydrogen atmosphere and biochar catalyst on tar decomposition and methane-rich gas production during biomass pyrolysis

Preparation of aromatic hydrocarbons from fast pyrolysis of waste medical mask catalyzed by modified HZSM-5

Self-assembly kieselguhr-based ZSM-5 for catalytic pyrolysis of mask waste to produce high value-added aromatics

Integrated approach for enhanced bio-oil recovery from disposed face masks through co-hydrothermal liquefaction with Spirulina platensis grown in wastewater

Aromatic‐rich oil production from catalytic co‐pyrolysis of pine sawdust and LDPE with bifunctional biochar by different preparation methods

Pyrolysis-catalysis of medical waste over metal-doping porous biochar to co-harvest jet fuel range hydrocarbons and H 2 -rich fuel gas

Preparation of High Catalytic Activity Biochar from Biomass Waste for Tar Conversion

Facile demineralization of biochar and its catalytic upgrading of bio-oil from fast pyrolysis of bagasse

Mechanism of in-situ dynamic catalysis and selective deactivation of H2O-activated biochar for biomass tar reforming

Preparation of monocyclic aromatic hydrocarbons from chlorine-containing mixed waste plastics via tandem catalysis coupled with hydrothermal pretreatment

Study on the hydrogen production promotion effect and immobilization mechanisms of copper during the pyrolysis process of waste cotton textiles