Abstract:The precipitation of wax at low temperature often leads to the viscosity increase of waxy crude oil, and even causes the blockage of pipelines in severe cases. The addition of polymer additives is an effective method for inhibiting wax precipitation. In the present work, poly(styrene-octadecyl acrylate)s with low crosslinking density were prepared through microemulsion polymerization, with styrene and octadecyl acrylate as monomers and N -(hydroxyethyl) acrylamide (NMA) as the crosslinking agent. The chemical structures and molecular weights of polymers were characterized by Fourier transform infrared spectroscopy and gel permeation chromatography, respectively. The crosslinking densities (CLD) of polymers were determined in the range of 1.32 × 10 −4 to 4.66 × 10 −4 cm 3 /mol by the dissolution equilibrium method. Waxy model oils were prepared to explore the crosslinked polymers on the wax crystallization behaviors by using X-ray diffraction (XRD) approaches and isothermal crystallization kinetics (ICK). As the CLD of polymers increases to 1.99 × 10 −4 cm 3 /mol, the crystallinity index (CI), grain size, and structural strength of the wax crystals decrease. However, as the CLD of polymers is further increased to 4.66 × 10 −4 cm 3 /mol, all of the above parameters increase, due to the deterioration of the co-crystallization ability of polymers. In the ICK tests, The Avrami index n of the model oil samples increases from 1.94 to 2.43 as the CLD increases, implying that the nucleation effect of polymers is increased. The effect of CLD on the cold flowability of Inner Mongolia crude oil was investigated by pour point test, rheology, differential scanning calorimeter (DSC), and polarized light microscopy (PLM). The results show that the pour point, viscosity, yield stress, thixotropic ring area, cumulative wax precipitation and wax crystal size of the crude oil decrease when the CLD of polymers increases to 1.99 × 10 −4 cm 3 /mol. However, if the CLD is further increased to 4.66 × 10 −4 cm 3 /mol, all of the parameters increase. Consequently, the mechanism for the improvement of waxy crude oil by mildly crosslinked polymer is proposed.

Continuous Addition Terpolymerization of Maleic Anhydride, Octadecyl Acrylate, and Docosyl Acrylate: Experimenting the Terpolymers As Pour Point Depressants for Waxy Crude Oils

Preparation of high molecular weight polypropylene glycol in microchannel reactor

Control of Diffusion/Barrier Effects of Polymer-Coated Particles and the Strengthening of Ethylene Polymerization Reactor

Controlling the Wax Crystallization Behaviors Via the Ratio of Phenyl to Aliphatic Branches in Block Copolymer Synthesized by RAFT Copolymerization

Study on structure control and pour point depression mechanism of comb-type copolymers

Controllable preparation of poly(butyl acrylate) by suspension polymerization in a coaxial capillary microreactor

Preparation and Performance Evaluation of a New Type of Polyethylene-vinyl Acetate/Polystyrene Microsphere Composite Pour Point Depressant for Waxy Crude Oil

Synthesis of long-chain polyester polymers and their properties as crude oil pour point depressant

Synthesis of terpolymer from Helianthus annuus (natural oil) and evaluation as pour point depressant and viscosity reducer on Indian crude oil

Performance improvement on the cold flow properties of crude oil with high asphaltene by adjusting the polarity of the third monomer in polymers

Preparation and mechanism of hyperbranched polymer as paraffin inhibitor and pour point depressant for high waxy crude oil

Efficient Continuous-Flow Synthesis of Diacyl Peroxide in a Microreactor and the Post-Processing of Its Effluent

Effect of Maleic Anhydride Copolymer on Cold Flow Ability of Waxy Oils

Enhancement of cold flowability for high waxy crude oil by the mildly crosslinked poly(styrene-octadecyl acrylate)

Novel laboratory cell for fundamental studies of the effect of polymer additives on wax deposition from model crude oils

Sustainable conversion of polystyrene waste into polymeric surfactants to be evaluated as pour point deperssants for waxy crude oil

Study on the Morphologic and Flow State of Polyacrylonitrile Particles in a Microchannel Reactor

Synthesis and Application of a New Style Crude Oil Pour Point Depressant

Direct Esterification in Helical Continuous-Flow Microreactors under an Aqueous Environment: Optimization, Reaction Kinetics, and Process Intensification

Synthesis of Comb‐type Copolymers with Various Pendants and Their Effect on the Complex Rheological Behaviors of Waxy Oils

Kinetics study of acrylic acid polymerization with a microreactor platform