Abstract:Heat-treatment processes to obtain carbide-free upper bainite, low bainite and low-temperature bainite in the 34MnSiCrAlNiMo medium-carbon steel were explored. Results show that in the steel bainite transformation mainly goes through three stages: short incubation, explosive nucleation and slow growth. When transformation temperature, T > Ms + 75 degrees C, upper bainite consisted of catenary bainitic ferrite and blocky retained austenite is obtained in the steel. When Ms + 10 degrees C < T < Ms + 75 degrees C, lower bainite is the main morphology composed of lath-like bainitic ferrite and flake-like retained austenite. When T < Ms + 10 degrees C, the lower bainite, also known as low-temperature bainite, is obtained, which contains much thinner lath-like bainitic ferrite and film-like retained austenite. Mechanical testing results show that the lower the transformation temperature is, the better comprehensive performance is. The low-temperature bainite has the very high tensile strength and impact toughness simultaneously. The lower bainite has lower tensile strength and higher impact toughness. The upper bainite has higher tensile strength and lower impact toughness. The big difference of the mechanical performance between these kinds of bainite is mainly caused by interface morphology, size, and phase interface structure of the bainitic ferrite and the retained austenite. Additionally, when the bainite transformation temperature is decreased, the high-angle misorientation fraction in packets of bainite ferrite plates is increased. High-angle misorientation between phase interfaces can prevent crack propagation, and thus improves impact toughness. (C) 2014 Elsevier Ltd. All rights reserved.

Acceleration of Bainitic Transformation Through Chemical Patterning of Austenite

Acceleration of Bainitic Transformation by Introducing AlN in Medium Carbon Steel

Acceleration of the Super Bainite Transformation Through A Coarse Austenite Grain Size

Kinetic Transitions and Mn Partitioning During Austenite Growth from a Mixture of Partitioned Cementite and Ferrite: Role of Heating Rate

Bainite Transformation-Kinetics-Microstructure Characterization of Austempered 4140 Steel

Experimental and theoretical analysis of multiphase microstructure in a newly designed MnSiCrC quenched and partitioned steel to promote bainitic transformation: The significant impact on mechanical properties

Notably Accelerated Nano-Bainite Transformation via Increasing Undissolved Carbides Content on GCr15Si1Mo Bearing Steel

Accelerated Isothermal Phase Transformation and Enhanced Mechanical Properties of Railway Wheel Steel: The Significant Role of Pre‐Existing Bainite

Carbide-Free Bainite in Medium Carbon Steel

Effect of Mn on the chemical driving force and bainite transformation kinetics in medium-manganese alloys

On Bainite Transformation Kinetics and Mechanism

Study on Bainitic Transformation by Dilatometer and in Situ LSCM

Evolution of ultrafine bainite microstructure during rapid heating process and the role of retained austenite

Multi-Step Isothermal Bainitic Transformation in Medium-Carbon Steel

Recent progress: bainite transformation in steels

In situ observation of bainite transformation of low carbon Si-Mn steel

Effect of ferrite-austenite morphology and orientation relationship on bainite transformation in low-alloy TRIP steels

Mechanism of Formation and Characteristics of Microstructure of Novel Nanobainitic Steel

Investigation of microstructural evolution and bainite transformation kinetics of multi-phase steel

Engineering Heterogeneous Multiphase Microstructure by Austenite Reverted Transformation Coupled with Ferrite Transformation

Study on the Influence of Pre-Formed Phase on Accelerating Bainitic Transformation