Abstract:Material response and the launch of laser plasma during the 1064 nm nanosecond laser pulse induced damage to the exit surface of fused silica are investigated. Employing a polarization-based two-frame shadowgraphy setup with ～ 60 fs probing resolution, the transient material responses from the rising part of nanosecond pumping pulse to several hundred nanosecond timescale are captured. Using a shearing interferometry setup, the evolution of transient phase shift of laser plasma in the expansion process to the ambient air is also investigated. Inhomogeneous distribution of phase shift caused by the electrons and neutrals in the plasma is quantitatively resolved by employing the fast Fourier transform based filtering algorism. To demonstrate the evolutions of important plasma parameters such as pressure, temperature and density, a continuum hydrodynamic model is numerically solved. The initial pressure of plasma is estimated according to the point-explosion model, and the initial plasma temperature is achieved by calculating the difference between simulating shockwave front radius and experimental value at the same delay. The optimal temperature is chosen when the radius difference is minimal. Main conclusions are as follows. 1) Abundant suprathermal electrons are excited in the early energy deposition process. Part of these electrons contribute to the thermal transport process and produce the laser supported solid-state absorption front (LSSAF) which propagates into the bulk silica. Other electrons escape to the air side and contribute to the formation of air plasma through the impact ionization process. Plasma expansion speed is about 20 km/s during this phase. 2) When the pump pulse is terminated, the LSSAF and air plasma lose their energy supplied and experience a rapid decline of the temperature and expansion velocity. As a result, the final damage crater depth exhibits seldomly no increase compared with the transient crater depth during this phase. Hot bulk plasma formed in this phase becomes the damage precursor and induces the ejection of abundant neutrals probably due to the phase explosion mechanism. Inhomogeneous distribution of stress is formed by Rayleigh-Taylor instability at the interface between hot bulk plasma and surrounding bulk material during the expansion of LSSAF. Radial and circumferential cracks are formed due to the release of stress. 3) Evolution of air plasma follows the conventional evolution process of laser-induced plasma, i. e. , internal pressure, temperature and density decrease quickly with time delay. The simulated transient highest pressure is about 600 MPa. Simulation also predicts the formation of the internal shockwave. Our work will be helpful in understanding the laser damage mechanism of the fused silica optical window.

Fate of Ejected Debris from the Explosion of the Rear Surface of Fused Silica in the High-Power Laser Facility

Spatial Sputtering of Fused Silica after a Laser-Induced Exploding Caused by a 355 Nm Nd: YAG Laser

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Laser-induced Damage Growth of Fused Silica at 351 Nm on a Large-Aperture High-Power Laser Facility

Ejecta Distribution and Transport Property of Fused Silica under the Laser Shock Loading

Surface Cleanliness Maintenance with Laminar Flow Based on the Characteristics of Laser-Induced Sputtering Particles in High-Power Laser Systems

Dynamics of filamentary damage induced by nanosecond laser in fused silica

A Design of Debris Mitigation System for High-Repetition-rate Petawatt Laser Experiments

Laser-Induced Damage Growth on Larger-Aperture Fused Silica Optical Components at 351 Nm

Damage Behaviors of Silica Microparticles on Fused Silica Optics under 355 Nm High Fluence Laser

Experimental and Computational Study of Damage Pocess Induced by 1064 Nm Nanosecond Laser Pulse on the Exit Surface of Fused Silica

Characterization of 355 Nm Laser-Induced Damage of Mitigated Damage Sites in Fused Silica

Propagation of Laser-Induced Particles from Fused Silica

Explosion Plume on the Exit Surface of Fused Silica During UV Laser- Induced Damage

Transient study on fused silica surface damage caused by dielectric particle contaminant in high-power laser system

A Quasi-Molecular Dynamics Simulation Study on the Effect of Particles Collisions in Pulsed-Laser Desorption

Investigation of the Multimechanism Laser Cleaning Dynamics for Rough Fused Silica Surfaces with Organic Contaminants: A Computational Simulation and Atomic Analysis.

Spatial characterization of debris ejection from the interaction of a tightly focused PW-laser pulse with metal targets

Mechanisms In Fs-Laser Ablation In Fused Silica

Behavior Analysis and Threshold Prediction of Laser-Induced Damage in Fused Silica Based on 2-D Thermal Diffusion Model

Experimental and Theoretical Investigation of Localized CO2 Laser Interaction with Fused Silica During the Process of Surface Damage Mitigation