The Effect of Annealing on Mechanical Properties of Selective Laser Melted CoCrNi Medium-Entropy Alloy

Jinlong Lv,Zhiping Zhou,Wenli Guo

DOI: https://doi.org/10.1016/j.matlet.2023.134353

IF: 3

2023-01-01

Materials Letters

Abstract:The mechanical properties were evaluated in the selective laser melted CoCrNi medium-entropy alloy after the annealing at 800 degrees C. The as-selective laser melted sample delivered the yield strength of 820 MPa, the ultimate tensile strength of 1090 MPa and the fracture strain of 34%, While corresponding value for annealed sample at 800 degrees C for 4 h was 630 MPa, 870 MPa and 42%, respectively. High density dislocation induced high strength of as-selective laser melted sample, and higher ratio of the low-angle grain boundaries in sample annealed at 800 degrees C for 1 h impeded the dislocation movement and improved the strength. Moreover, high density dislocation and phase transformation from a face-centered cubic phase to a hexagonal close-packed phase in better recrystallization sample annealed at 800 degrees C for 4 h synergistically induced strength-ductility trade-off.