Beneficial Effects of La0.5Sr0.5CoO3 Coatings on Thin‐Film LiMn2O4 Cathodes for Lithium Ion Batteries

Xiankai Yu,Roberto Scipioni,Yao-bin Xu,Jinsong Wu,Vinayak P. Dravid,Scott A. Barnett

DOI: https://doi.org/10.1002/adsu.202300137

IF: 6.737

2023-01-01

Advanced Sustainable Systems

Abstract:The severe capacity loss of spinel LiMn2O4 (LMO) limits the utility of this otherwise promising lithium ion battery cathode material. One of the strategies to mitigate capacity fade is applying a coating on LMO particle surfaces. While this approach yields promising results, there is limited understanding of mechanisms whereby coatings improve LMO capacity retention. Herein, the effects of a new protective coating material, La0.5Sr0.5CoO3 (LSCO), in a thin-film battery geometry that is amenable to fundamental studies of electrode processes, are reported. RF sputtering deposition is used to produce high quality 25-100 nm LMO cathodes on Al2O3 substrates with an intervening Pt/Ti back-side contact layer. Cycling of the un-coated cathodes results in capacity loss of 18% over 300 cycles. Adding a 2 nm LSCO layer reduces the capacity loss to 3%. While this may be due in part to reduced Mn dissolution, scanning transmission electron microscopy results indicate that the coating helps to preserve crystallinity and reduce lattice structure distortion due to inhibited formation of defect tetragonal spinel. Three-electrode electrochemical impedance spectroscopy results reveal that the LSCO coating increases charge transfer and ohmic resistances, but the increases are generally too small to significantly impact cell performance even at high C-rates.