Abstract:Poly(ethylene 2,5-furandicarboxylate) (PEF) is a biobased polyester characterized by high gas barrier properties as well as high tensile modulus and strength, but poor toughness. Toughening PEF without sacrificing its modulus, strength and gas barrier performance is a great challenge for PEF modification. In this study, high molecular weight random poly(ethylene- co-1,5-pentylene 2,5-furandicarboxylate)s (PEPeFs) were synthesized via melt copolycondensation of 2,5-furandicarboxylic acid (FDCA), ethylene glycol (EG) and 1,5-pentanediol (PeDO), a cheap, biobased and commercially available odd-carbon comonomer. The synthesized PEPeFs were characterized and assessed with intrinsic viscosity, ATR-FTIR, 1H NMR, DSC, TGA and tensile, impact and O2 permeation test. Mayo-Lewis equation with "reactivity ratio" of 3.78 for PeDO and 0.75 for EG could be used as an empirical equation to correlate the copolyester composition (ϕPeF) with monomer composition. PEPeFs proved nearly amorphous copolyesters having excellent thermal stability. Brittle-ductile transition was achieved at ϕPeF as low as 9 mol %. Increasing ϕPeF led to increase in elongation at break and notch impact strength and decrease in Tg, O2 barrier performance and tensile modulus and strength. However, in comparison with PEF, PEF-rich PEPeFs (ϕPeF 9-47%) not only showed greatly improved elongation at break (29-265% vs 4%) and enhanced impact strength (2.2-3.9 kJ/m2) but also retained very high Young's modulus (2.8-3.3 vs 3.3 GPa) and yielding strength (72-83 vs 82 MPa). Particularly, when compared with bottle-grade PET, PE82Pe18F possesses equal Tg (ca. 75 °C) and comparable elongation at break (ca. 115%), but greatly improved yielding strength (83 MPa) and O2 gas barrier property (4.8 times). As modified PEF materials possessing superior thermo-mechanical and O2 gas barrier properties, these integrally biobased copolyesters may find practical applications in eco-packaging and other fields.

Preparation and Property of TPEE Polyester Elastomer Toughened Modified Copolyformaldehyde

Synthesis and Characterization of Polyolefin Thermoplastic Elastomers: A Review

High-Performance Olefin Thermoplastic Elastomer Based on Dynamically Cross-Linking Crystalline Macromers and Elastic Backbones

Poly(ethylene 2,5-Furandicarboxylate-mb-poly(tetramethylene Glycol)) Multiblock Copolymers: from High Tough Thermoplastics to Elastomers

Modification of Poly(ethylene 2,5-Furandicarboxylate) with Biobased 1,5-Pentanediol: Significantly Toughened Copolyesters Retaining High Tensile Strength and O2 Barrier Property

Preparation, Morphology and Properties of Poly(Trimethylene Terephthalate)/Thermoplastic Polyester Elastomer Blends

Characterization and Properties of Thermoplastic Polyether Elastomer/Polyoxymethylene Blends Prepared by Melt-Mixing Method

Characterizations and Properties of POM Toughened by Thermoplastic Polyamide Elastomer

Investigation on the mechanical, thermal and electrical properties of polyoxymethylene composites modified by thermoplastic polyurethane elastomer and carbon fiber

Toughening Modification of Poly(butylene Terephthalate)/poly(ethylene Terephthalate) Blends by an Epoxy-Functionalized Elastomer

Preparation and Properties of Hindered Phenol AO-80/polyester-based Polyurethane Thermoplastic Elastomer Composite

Study on POM Modification by Thermoplastic Polyurethane Elastomer

Preparation and Characterization of High Melt Strength Thermoplastic Polyester Elastomer with Different Topological Structure Using a Two-Step Functional Group Reaction

Significant Enhancement of Mechanical and Thermal Properties of Thermoplastic Polyester Elastomer by Polymer Blending and Nanoinclusion

Preparation and Properties of Poly(Ethylene Terephthalate)/Poly(Butylene Terephthalate) Alloys with High Toughness

Preparation and Properties of Poly(Ethylene Terephthalate)/GF Toughened by Different Modifiers

Polyoxymethylene/thermoplastic polyamide elastomer blends: Morphology, crystallization, mechanical, and antistatic properties

Toughened poly(butylene terephthalate) by epoxided ethylene-propylene-diene-rubber

Fabrication of poly(ethylene terephthalate)/polypropylene-based elastomer blends with balanced stiffness-toughness: The effect of reactive compatibilization

Synthesis and Characterizations of Poly(Trimethylene Terephthalate)-B-Poly(Tetramethylene Glycol) Copolymers

A new strategy to improve the toughness of epoxy thermosets by introducing the thermoplastic epoxy